Table of Contents
Advertisement
OPERATING INSTRUCTIONS (CONT'D)
TO CHANGE SETTINGS FOR TEMPERATURE INTENSITY
1. Select desired menu (see Dual Menu Programs section for more information). While toaster is on, press
and hold the TEMPERATURE INTENSITY "Up" button until the reading on the display begins to "blink" –
then release finger off the "Up" button.
2. While the display is blinking, press either the "Up" or "Down" buttons depending on the TEMPERATURE
INTENSITY setting you wish to reach.
3. Once you have reached the desired setting, wait for display to stop blinking. The new setting will be saved
into memory once the display has stopped blinking.
After the TEMPERATURE INTENSITY setting has been changed, it is important to note that it may take a few
minutes for the toaster to complete the conversion to the new setting. The display will read "HI" or "Lo"
depending on the type of conversion until it reaches the new setting.
SRT3-10 - Ops Manual
!
IMPORTANT:
OR
!
11
Advertisement
Table of Contents
