Related Manuals for Lincoln Electric 8005-000-U (DOMESTIC)
Summary of Contents for Lincoln Electric 8005-000-U (DOMESTIC)
- Page 1 INSTALLATION & OPERATING INSTRUCTIONS SRT3-10 FRONT RETURN TOASTER MODEL 8005 TO BE SERVICED ONLY BY AUTHORIZED PERSONS SRT3-10ops REV: B...
-
Page 2: Important Warning & Safety Information
IMPORTANT WARNING AND SAFETY INFORMATION This manual contains important safety and installation-operation instructions. Require all operators to read this manual thoroughly before installing, operating or NOTE: servicing this equipment. Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Do not work around conveyor belt with long hair, loose clothing, or dangling jewelry. -
Page 3: Table Of Contents
TABLE OF CONTENTS IMPORTANT WARNING & SAFETY INFORMATION…………………………………………………………..………. 2 TOASTING BREAD PRODUCTS………………………………………………………………………………………..… 2 UTILITY SPECIFICATION…………………………………………………………………...…………………………...… 4 EXTERIOR DIMENSIONS………………………………………………………………………………………………..… 4 BEFORE INSTALLATION……………………………………………………………………….……………………..…… 5 INSTALLATION…………………………………………………………………………………………….……………...… 5 ELECTRICAL SERVICE & GROUNDING INSTRUCTIONS……………………………..…………………………..…. 5 ELECTRICAL CODE REFERENCE………………………………………………………………………………………. 6 VENTILATION………………………………………………………………………………………………….………..…… 6 SPACING…………………………………………………………………………………………………………………..…. 6 CONTROL PANEL FEATURES………………………………………………………………………………………….… 6 FUNCTIONS………………………………………………………………………………………………………………….. -
Page 4: Utility Specification
UTILITY SPECIFICATION LINCOLN FRONT RETURN TOASTER Model Voltage Current Watts Phase Belt Width Width Depth Height 8005-000-U 10” 15” 26 ½” 16” 208 / 240 VAC 60 Hz 21.2 Amps 4400 (DOMESTIC) (254mm) (381mm) (673mm) (406mm) 8005-000-E 10” 15” 26 ½” 16”... -
Page 5: Before Installation
BEFORE INSTALLATION NOTE: Upon receipt of this unit, immediately unpack and inspect for possible concealed shipping damage. If unit is found to be damaged, save all packing materials and contact your delivery carrier within 5 days. Refer to “Shipping Damage Instructions” enclosed for detailed instructions. Failure to follow these instructions will negate Lincoln’s or your ability to file claims and receive compensation for shipping damage. -
Page 6: Electrical Code Reference
ELECTRICAL CODE REFERENCE IN USA When installed, this appliance must be electrically grounded and its installation must comply with the National Electric Code, ANSI-NFPA 70, latest version, the Manufacturer’s Installation Instructions, and applicable municipal building codes. IN CANADA All electrical connections are to be made in accordance with CSA C22.1 – Canadian Electrical Code Part 1 and/or local codes. -
Page 7: Operating Instructions
OPERATING INSTRUCTIONS Do not work around conveyor belt with long hair, loose clothing, or dangling jewelry. DANGER! Getting caught in the belt could result in serious injury. Do not use parchment paper when placing food product through the toaster! Use WARNING: of such materials may cause a fire and should never be placed in the toaster. -
Page 8: Dual Menu Programs
OPERATING INSTRUCTIONS (CONT’D) DUAL MENU PROGRAMS The SRT3-10 Toaster is equipped with two (2) separate menu programs to allow for dual menu settings. These menu programs are shown on the display as “P1” and “P2.” To access each menu, simply press the “1” or “2” button to access the respective menus. -
Page 9: Reading Current Settings
OPERATING INSTRUCTIONS (CONT’D) TO READ CURRENT SETTINGS FOR TIME AND TEMPERATURE INTENSITY 1. Select desired menu (see Dual Menu Programs section for more information). To read what the current TIME settings are for your toaster, simply press and release the “Up” arrow once. Display will read the current TIME setting. -
Page 10: Changing The Settings
OPERATING INSTRUCTIONS (CONT’D) TO CHANGE SETTINGS FOR TIME 1. Select desired menu (see Dual Menu Programs section for more information). While toaster is on, press and hold the TIME “Up” button until the reading on the display begins to “blink” – then release finger off the “Up”... - Page 11 OPERATING INSTRUCTIONS (CONT’D) TO CHANGE SETTINGS FOR TEMPERATURE INTENSITY 1. Select desired menu (see Dual Menu Programs section for more information). While toaster is on, press and hold the TEMPERATURE INTENSITY “Up” button until the reading on the display begins to “blink” – then release finger off the “Up”...
- Page 12 OPERATING INSTRUCTIONS (CONT’D) TO CHANGE SETTINGS FOR TEMPERATURE INTENSITY (CONT’D) 4. After the new setting has been saved and the toaster reached the new TEMPERATURE INTENSITY setting the display will revert back to “P1” or “P2” menu. CALIBRATION MODE IMPORTANT: IT IS VERY IMPORTANT THAT YOU ADHERE TO THE FOLLOWING INSTRUCTIONS PERTAINING TO THE CALIBRATION MENU.
-
Page 13: Cleaning Instructions
CLEANING INSTRUCTIONS Before disconnecting power supply from toaster, allow unit to cool down until CAUTION: the fan shuts off automatically. Failure to do so could result in component failures. Disconnect power supply before servicing or cleaning this toaster. Safeguard DANGER! power so it cannot be accidentally restored. -
Page 14: Schematics
SCHEMATIC • DOMETIC MODEL 8005-000-U SRT3-10 - Ops Manual... - Page 15 SCHEMATIC • EXPORT MODEL 8005-000-E SRT3-10 - Ops Manual...
-
Page 16: Warranty
LIMITED WARRANTY FOR COMMERCIAL PRODUCTS LIMITED WARRANTY Lincoln Foodservice Products, LLC (“Lincoln”) warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. During the warranty period, Lincoln shall, at Lincoln’s option, repair, or replace parts determined by Lincoln to be defective in material or workmanship, and with respect to services, shall re-perform any defective portion of said services. - Page 17 This page intentionally left blank. SRT3-10 - Ops Manual...
- Page 18 This page intentionally left blank. SRT3-10 - Ops Manual...
- Page 19 This page intentionally left blank. SRT3-10 - Ops Manual...
- Page 20 Lincoln Foodservice Products, LLC 1111 North Hadley Road Fort Wayne, Indiana 46804 United States of America Telephone: (260) 459-8200 U.S. Facsimile: (888) 790-8193 Int’l Facsimile: (260) 436-0735 Technical Support Hotline: (800) 678-9511 www.lincolnfp.com SRT3-10 - Ops Manual...