Advertisement
Battery Bag, Battery and Motor Controller
Tightening
Tightening
Battery and Battery Bag
The battery bag can be mounted on either side of the bike with the hooks hanging onto
•
the rear pannier rack. Mount the bag in the most rear position to avoid any interference
with peddling: this is a common issue with panniers and the pannier rack can be
adjusted to sit further
back as needed.
Place the battery in the
•
bag such that the battery
on/off switch and
charging port are
accessible through the
flap in the bag.
A strap and buckle are
•
provided that can loop
around the bag and
prevent it from swinging
or bouncing side-to-side.
Motor Controller
The motor controller contains the electronics to deliver power from the battery pack to the hub
motor based on the user's throttle setting.
Place the eZee Kit Motor Controller in the battery bag with the LED light visible through
•
the indicator window in the bag, as well as red and black battery connectors facing up.
Feed the motor controller wires out of the hole in the bottom of the motor controller
pocket.
Renaissance Bicycles
eZee Kit Installation Guide Version 1.2
strap
strap
Rear Pocket for
Rear Pocket for
Motor Controller
Motor Controller
Outlet for Wires in
Outlet for Wires in
bottom (not visible)
bottom (not visible)
The eZee Kit Battery
bag is designed to
hook on a rear
pannier rack. It holds
both the Battery and
Motor Controller.
4
Advertisement
