Troubleshooting - JVC KD-LH2000 Instructions Manual

q!s TROUBLESHOOTING
42
Ill
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
Causes Remedies
l
Sound is sometimes
interrupted.
You are driving on rough
roads.
Disc is scratched.
Connections are incorrect.
Stop playback while driving on
rough roads.
Change the disc.
Check the cords and
connections.
l
Sound cannot be heard
from the speakers.
The volume level is set to the
Adjust it to the optimum level.
minimum level.
Connections are incorrect. Check the cords and
connections.
l
CD cannot be played back.
Disc is inserted upside down.
Insert the disc correctly.
l
CD-R/CD-RW cannot be CD-R/CD-RW is not finalized.
l
Insert a finalized
played back.
CD-R/CD-F&V.
l
Tracks on the CD-R/CD-RW
l
Finalize the CD-R/CD-RW
cannot be skipped.
with the component which
you used for recording. (See
page 44.)
l
"No Disc" flashes on the
display
l
Disc cannot be ejected.
l
This unit does not work at
all.
l
"Panel Connect Error"
appears on the display.
No disc in the loading slot.
Insert a disc into the loading slot.
Disc is inserted incorrectly.
Insert the disc correctly.
Disc is locked.
Unlock the disc (See page 16.)
The built-in microcomputer Press the reset button on the
may have functioned
panel holder using a ball-point
incorrectly due to noise, etc.
pen after detaching the control
panel. (The clock setting and
preset stations stored in memory
are erased.) (See page 2.)
-
The control panel is not Remove the control panel, wipe
attached correctly and firmly.
the connectors, then attach it
again. (See page 36.)
l
SSM (Strong-station
Signals are too weak.
Store stations manually.
Sequential Memory)
automatic preset does not
work.
l
Static noise while listening
The antenna is not connected
Connect the antenna firmly.
to the radio. firmlv.