Table of Contents
Advertisement
36
Getting Started
Connecting to a power source
Connecting to a power source
NOTE
Your device requires power to operate. Use the provided
USB power cable and separate optional compatible USB/AC
adaptor to connect the device to a live electrical outlet to
charge the device's battery.
To connect AC power to the device:
1
Connect the USB power cable to an optional compatible
USB/AC adaptor.
2
Plug the USB power cable into the Micro USB port on
_
+
the device.
Toshiba recommends you use the USB power cable
included with your device and an optional compatible
USB/AC adaptor. A compatible USB/AC adaptor is
available for purchase at toshiba.com/us.
Always confirm that the power plug (and extension cable
plug if used) has been fully inserted into the socket, to
ensure a secure electrical connection. Failure to do so
may result in a fire or electric shock, possibly resulting in
serious injury.
Be careful if you use a multiple connector. An overload on
one socket could cause a fire or electric shock, possibly
resulting in serious injury.
Always use a compatible Toshiba USB/AC adaptor with
your device, or use USB/AC adaptors specified by
Toshiba to avoid any risk of fire or other damage to the
device. Use of an incompatible USB/AC adaptor could
cause fire or damage to the device possibly resulting in
serious injury. TOSHIBA assumes no liability for any
damage caused by use of an incompatible adaptor.
Handling the cord on this product will expose you to
lead, a chemical known to the State of California to
cause birth defects or other reproductive harm.
Wash hands after handling
.
Advertisement
Table of Contents
