Related Manuals for Next LAm115
Summary of Contents for Next LAm115
-
Page 1: User Guide
LAm115 User’s Guide USER GUIDE LAm115 High power asymmetric dispersion Stage monitor www.next-proaudio.com... -
Page 2: Table Of Contents
LAm115 User’s Guide Contents Page 1. Introduction 2. Unpacking 3. Overview 4. Safety first 5. System Setup 5.1 Full Range m 5.2 Bi-Amp mode 6. Cable Selecting 7. Amplification 8. Trouble shooting 9. Technical Specifications 10. Warranty 11. Contacts www.next-proaudio.com... -
Page 3: Introduction
Controller to provide crossover, limiting and EQ functions. When operated in Full-Range mode the LAm115, may be used without a controller, but benefits from the EQ and limiting functions of the DP240. This also ensures that both Bi-Amp and Full-Range configurations will exhibit the same tonal balance when used together on stage. -
Page 4: System Setup
Either connector can be used when connecting amplifiers and also to link to an additional Lam115 cabinet. 5.1 Full Range mode On the LAm115 used in Full-Range mode (toggle switch on the Full-Range position), the NL4 connectors are wired as follows: PIN 1+ - Full-Range input +... -
Page 5: Amplification
4 mm² [AWG #10] 32 m [104 ft] 16 m [52 ft] 7. Amplification LAm115 monitors are designed to be used with professional power amplifiers capable of producing the following power outputs into 8 ohms: Full-Range: 800W/8 ohms to 1000W/8 ohms Bi-Amp:... -
Page 6: Trouble Shooting
Internal connection wires or absorbing material touching the loudspeaker diaphragm: check by removing the bass loudspeaker. Loudspeaker not connected or phase reversed following a previous inspection, test or repair. 9. TECHNICAL SPECIFICATIONS LAm115 TECHNICAL SPECIFICATIONS Design Bass-Reflex, asymmetrical Dispersion Frequency Range (-6dB) 58Hz-19KHz Dispersion (HxV) 60º... -
Page 7: Warranty
God or accident, or any use of this product that is not in accordance with the instructions provided by this manual and/or NEXT-proaudio. NEXT-proaudio is not liable for consequential damages.
Need help?
Do you have a question about the LAm115 and is the answer not in the manual?
Questions and answers