Appendix 1 Technical Specifications Operating System Support Serial/Ethernet Device Driver Microsoft Windows 2000, XP Mac OS 10.1 & above Inmarsat LaunchPad Microsoft Windows 2000, XP Mac OS 10.1 & above Application Support VPN Client Based on PPTP, L2TP and IPSec VoIP H.323 and SIP...
Page 57
Appendix 3 SABRE I LCD Menu Tree Flow Chart The SABRE I LCD Menu Tree Flow Chart shows the user the various displays, features and options that the built in user Interface of the SABRE I offers. Menu Emergency call Phone book Call register Settings...
Page 60
Interface Note: Any configuration only can be done by enable ethernet first. LCD display “Enable Ethernet first!”. To configure settings in router connection, must set the connectivity to “router connection”. Else, LCD display “Enable router connection first!”. LCD display Enable Back to menu “Ethernet enabled!”...
Page 61
Interface LCD display DHCP config Start Back to menu “DHCP server started!” Ethernet LCD display Back to menu Stop “DHCP server stopped!” LCD display current IP address Back to menu Start and End IP address If edit both start IP address & End IP address Edit (softkey) was successfully, display “settings saved!”...
Appendix 4 Accessories Accessories (Standard and Optional) These are the accessories available to be used with SABRE™ I. Accessories in are optional. Purchase and ordering of all accessories can be made from the SABRE™ I distributors. Description Order Quote Specifications Bluetooth SB1/BCP1000 Bluetooth v1.2 compliant...
Appendix 6 Voice Mail Access When someone leaves a Voice Mail in the user Voice Mail account, the network will send the user a SMS message informing the user of the presence of a Voice Mail in his/her account. For users that are accessing the mailbox for the 1 time please kindly see below.
Appendix 7 Troubleshooting Guide This section provides a list of commonly encountered problems, their possible causes and solutions. Problem Possible Cause Solution Turn on SABRE™ I using the power from the mains via the power adapter. Proceed on with the following steps only i f S A B R E ™...
Need help?
Do you have a question about the SABRE I and is the answer not in the manual?
Questions and answers