Sony HVR-DR60 Service Manual page 20

7. Attach the sheet (HD-035) sheet to the heatsink B fitting to the corner of connector.
Heatsink B
Sheet Bus (HD-035)
8. Insert the other end of FBH-002 connected to the SW-492 board to the connector on HD-035 board.
9. Place the FBH-002 cable connected to the LCD PWB board between the TOP CASE BLOCK ASSEMBLY and LCD PWB board.
10. Place the harnesses from the battery terminal board and DC-IN connector as shown in the figure below.
Harness of DC-IN Connector
HVR-DR60
Connector
FBH-002
Top Case Block Assy
Harness of Battery terminal board
HD-035 Board
Flexible Flat Cable (FBH-002)
LC-093 Board
HELP