Clear-Com Tempest 2400 Quick Start Manual
Clear-Com Tempest 2400 Quick Start Manual

Clear-Com Tempest 2400 Quick Start Manual

Hide thumbs Also See for Tempest 2400:

Advertisement

BaseStation Menu
BeltStation Menu
Clear-Com, LLC
1301 Marina Village Parkway
Suite 105
Alameda, CA 94501
510.337.6600
Phone
www.clear-com.com
© 2014 HM Electronics, Inc All rights reserved.
Tempest is manufactured by CoachComm, LLC and is distributed by Clear-Com, LLC.
®Tempest and the Tempest logo are registered trademarks of CoachComm, LLC.
®Clear-Com and the Clear-Com logo are registered trademarks of HM Electronics, Inc.
© Telex, AudioCom and RTS are registered trademarks of Telex Communications, Inc
Part Number: 399G078 Rev A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tempest 2400 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Clear-Com Tempest 2400

  • Page 1 BaseStation Menu BeltStation Menu Clear-Com, LLC 1301 Marina Village Parkway Tempest is manufactured by CoachComm, LLC and is distributed by Clear-Com, LLC. Suite 105 ®Tempest and the Tempest logo are registered trademarks of CoachComm, LLC. Alameda, CA 94501 ®Clear-Com and the Clear-Com logo are registered trademarks of HM Electronics, Inc.
  • Page 2 Tempest 2400 ® 2-Channel Quick Start Guide What’s in the box: BaseStation CM-222 series BaseStation ● 5 Bay Battery Charger (optional) Power cord ● Battery charger ● 2dBi Omni-directional whip antenna ● AC cable ● 3.5mm to 3.5mm 3 conductor data pairing cable ●...
  • Page 3 Important things you need to know Selecting the RF band Tempest2400 operates in the 2400 to 2483 MHz frequency spectrum and should never be synced with Tempest900 models. Tempest® BaseStations and BeltStations are shipped with a The first time you power up the BaseStation, you will be prompted default RF configuration.
  • Page 4 ● » Intercom type select switch A&B controls intercom channels A and B. » CLEAR-COM is used for Clear-Com and Clear-Com compatible 2-Wire systems. » RTS is used for RTS and RTS compatible systems. » BAL is used for Telex AudioCom & AudioCom compatible systems.

Table of Contents