Download Print this page
Clear-Com Tempest 900 Quick Start Manual
Clear-Com Tempest 900 Quick Start Manual

Clear-Com Tempest 900 Quick Start Manual

Hide thumbs Also See for Tempest 900:

Advertisement

Quick Links

BaseStation Menu
BeltStation Menu
Clear-Com, LLC
1301 Marina Village Parkway
Suite 105
Alameda, CA 94501
510.337.6600
Phone
www.clear-com.com
© 2014 HM Electronics All rights reserved.
Tempest is manufactured by CoachComm, LLC and is distributed by Clear-Com, LLC.
® Tempest and the Tempest logo are registered trademarks of CoachComm, LLC.
® Clear-Com and the Clear-Com logo are a registered trademark of HM Electronics, Inc.
© Telex, AudioCom and RTS are registered trademarks of Telex Communications, Inc
Part Number: 399G080 Rev A

Advertisement

loading
Need help?

Need help?

Do you have a question about the Tempest 900 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Clear-Com Tempest 900

  • Page 1 ® Tempest and the Tempest logo are registered trademarks of CoachComm, LLC. 510.337.6600 Phone ® Clear-Com and the Clear-Com logo are a registered trademark of HM Electronics, Inc. www.clear-com.com © Telex, AudioCom and RTS are registered trademarks of Telex Communications, Inc ©...
  • Page 2 Tempest ® 4-Channel QuickStart Guide What’s in the box: What else you may need: Headset, one for each user; may be dynamic or electret ● microphone, with a 4-PIN XLR female connector BaseStation 3-PIN XLR cables to connect to external 2-Wire Intercom ●...
  • Page 3 Important things you need to know Tempest900 operates in the 902 to 928 MHz frequency spectrum. Changing the Default RF Tempest900 models should never be synced with Tempest2400 models. Configuration Tempest BaseStations and BeltStations are shipped with a default RF configuration.
  • Page 4 Intercom type select switch A&B controls intercom channels A and B; C&D controls both intercom channels C and D. » CLEAR-COM is used for Clear-Com and Clear-Com compatible 2-Wire systems. » RTS is used for RTS and RTS compatible systems.