5.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
3.1.8 Entering the coordinate of the destination
You can also select a destination by entering its coordinate. Do as follows:
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap
3.
Open the
4.
You can enter the latitude and longitude values in any of the following formats: decimal
degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds.
5.
(optional) If necessary, tap
coordinate in UTM format.
6.
When finished, tap
and start your journey.
menu and tap
.
to modify route parameters, or tap
to return to the Navigation menu.
.
.
then
and enter the
NX404AU English 59