Multiple Functions on a Single Screen
This allows you to search the Web, use apps, and much more while watching TV.
"
Before using
Multi-Link
requires an Internet connection.
"
Before using Smart Hub with
On TV
Setup) and finish configuring Smart Hub.
"
If the Multi-Link Screen launches while the TV did not configure the Smart Hub, a pop-up window appears.
To use the Multi-Link Screen, you need to configure the Smart Hub first. On the pop-up window, select the
Set Up Smart Hub
Launching Multi-Link Screen
Picture
>
Open Multi-Link Screen
From the
Picture
menu, run
"
Press
M.SCREEN
Using Multi-Link Screen
"
UHD and FHD contents and channels cannot be viewed simultaneously.
"
Launching
Smart Hub
"
Certain TV features and apps may not be supported by
Multi-Link Screen
Selecting a Feature
11
Press the Samsung Smart Control's
Options menu appears.
21
Select a feature from the Options menu. This initialises the selected feature.
"
Features supported by
Changing the Channel/Volume
11
Place the pointer or focus over the screen for which you want to change the channel or adjust
the volume.
21
Use the channel buttons to change the channel or the volume buttons to adjust the volume. This
changes the selected screen's channel/volume.
Screen, make sure the TV is connected to the Internet. Using
Multi-Link
to finish configuring the Smart Hub.
Open Multi-Link
on the Samsung Smart Control to launch
while using
Multi-Link Screen
and then use the feature.
Multi-Link Screen
Screen, go to the
On TV Settings (Smart Hub
Screen.
Multi-Link
automatically terminates
Multi-Link
M.SCREEN
button while
vary depending on the country.
Multi-Link Screen
>
Screen.
Multi-Link
Screen. If this is the case, exit from
Multi-Link Screen
is running. The
On TV Settings
>
Screen.