Testing Noise Around The Tv's Built-In Microphone - Samsung Smart TV E-Manual

Testing Noise Around the TV's Built-in Microphone

System > Voice Control
To enable Voice Control using the TV's built-in microphone, you must run the Voice Control
Environment Test to improve the voice recognition rate.
11
Navigate to System
within 4 m of the TV.
21
Select Start to measure the ambient noise. If the ambient noise level is suitable, the test will
proceed to the next step. If this part of the test fails, remain quiet and try again.
31
This test measures the volume and clarity of the user's voice. The TV will play an audio recording
of the command shown on the screen. Repeat the command loud and clear within 30 seconds. If
the TV successfully recognises your voice command, the test is complete and the TV proceeds to
the next step. If this part of the test fails, try again.
41
The level of echo in the surrounding area is measured. If the echo level is suitable, the Voice
Control Environment Test will end.
Checking Ambient Noise and Illumination (Voice & Motion Control Environment
Check)
Support > Self Diagnosis
Navigate to Support
This function measures the ambient noise and illumination levels around the built-in camera and
microphone of the TV to check if they are suitable for voice and motion control use.
> Voice Recognition Environment Test
> Voice Control
> Voice & Motion Control Environment Check
> Self Diagnosis and select
and run Voice Recognition Environment
Voice & Motion Control Environment
Test, and stand
Check.