BFT EOS 120 VENERE D Installation And User Manual
  1. Manuals
  2. Brands
  3. BFT Manuals
  4. Garage Door Opener
  5. EOS 120 VENERE D
  6. Installation and user manual

BFT EOS 120 VENERE D Installation And User Manual

Automation for overhead and sectional garage doors
Hide thumbs Also See for EOS 120 VENERE D:
Table of Contents

Advertisement

Quick Links

See also: Installer and User Manual
I
AUTOMAZIONI PER PORTE BASCULANTI E SEZIONALI
GB
AUTOMATION FOR OVERHEAD AND SECTIONAL GARAGE DOORS
F
AUTOMATION POUR PORTES BASCULANTES ET SECTIONALES
D
GARAGENTORANTRIEB FÜR SCHWING UND SEKTIONALTORE
E
AUTOMATIZACIONES PARA PUERTAS BASCULANTE Y SECCIONALES
P
AUTOMATIZAÇÕES PARA PORTAS BASCULANTES DE MOLAS E SECCIONAIS
ISTRUZIONI D'USO E DI INSTALLAZIONE
INSTALLATION AND USER'S MANUAL
INSTRUCTIONS D'UTILISATION ET D'INSTALLATION
MONTAGE- und BEDIENUNGSANLEITUNG
INSTRUCCIONES DE USO Y DE INSTALACION
INSTRUÇÕES DE USO E DE INSTALAÇÃO
Via Lago di Vico, 44
36015 Schio (VI)
Tel.naz. 0445 696511
Tel.int. +39 0445 696533
Fax 0445 696522
Internet: www.bft.it
E-mail: sales@bft.it
D811526_01 15-12-06
8
027908 3 0 0 4 9 2
EOS 120
VENERE D

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EOS 120 VENERE D and is the answer not in the manual?

Questions and answers

Related Manuals for BFT EOS 120 VENERE D

Summary of Contents for BFT EOS 120 VENERE D

  • Page 1 INSTRUCTIONS D'UTILISATION ET D'INSTALLATION MONTAGE- und BEDIENUNGSANLEITUNG INSTRUCCIONES DE USO Y DE INSTALACION INSTRUÇÕES DE USO E DE INSTALAÇÃO Via Lago di Vico, 44 36015 Schio (VI) Tel.naz. 0445 696511 Tel.int. +39 0445 696533 Fax 0445 696522 Internet: www.bft.it E-mail: sales@bft.it...
  • Page 2 • Do not allow persons or children to remain in the automation polystyrene, PVC, etc.) according to the national rules in force. operation area. 1) Remove the existing locking bolt from the cremone bolt of the door. EOS 120 VENERE D Ver.01 -...
  • Page 3 Slow-down distance:..closing: ~24 cm....opening: ~24 cm end-of-stroke adjustment), programming is exited and the display is ), programming is exited and the display is Fuses:.................see figure 17 switched off (the END message is displayed). 18 - EOS 120 VENERE D Ver.01...
  • Page 4 - Eliminate list ( ON: In case of obscuring, this excludes photocell operation on WARNING! Completely removes all memorised radio control devices opening. During the closing phase, it immediately reverses from the receiver memory. the motion. EOS 120 VENERE D Ver.01 -...
  • Page 5 20 - EOS 120 VENERE D Ver.01...
  • Page 6 Automatic bolt release device for spring-operated overhead time new additional transmitters can be memorised. doors. Fitted to the control arm, it automatically releases the This mode does not require access to the control panel. side door bolts (fig.24). EOS 120 VENERE D Ver.01 -...
  • Page 7 22 - EOS 120 VENERE D Ver.01...
  • Page 8 Press OK key (Enter/confirm) KO! message (value or function error) No. radio control devices memorised Menu scrolling (+ = preceding - = following) “Wait” message (enter value or function) FOLLOWING MENUS FIG. B EOS 120 VENERE D Ver.01 -...
  • Page 9 Release P1 on radio control device. control device Press the required T (key) on radio control device – see Fig. B3 Press the required T (key) on radio control device – see Fig. B3 24 - EOS 120 VENERE D Ver.01...
  • Page 10 E14 24V 25W max EOS 120 VENERE D Ver.01 -...
  • Page 11 58 - EOS 120 VENERE D Ver.01...
  • Page 12 EOS 120 VENERE D Ver.01 -...
  • Page 13 60 - EOS 120 VENERE D Ver.01...
  • Page 14 EOS 120 VENERE D Ver.01 -...
  • Page 15 62 - EOS 120 VENERE D Ver.01...
  • Page 16 EOS 120 VENERE D Ver.01 -...

Table of Contents