Table of Contents
Advertisement
TROUBLESHOOTING
14
Insert the tool straight into the access hole of terminal
retainer as shown.
Push the terminal retainer down to the temporary lock
position.
(c)
Release the locking lug from terminal and pull the
terminal out from rear.
4.
INSTALL TERMINAL TO CONNECTOR
(a)
Insert the terminal.
HINT:
1.
Make sure the terminal is positioned correctly.
2.
Insert the terminal until the locking lug locks firmly.
3.
Insert the terminal with terminal retainer in the
temporary lock position.
(b)
Push the secondary locking device or terminal retainer
in to the full lock position.
5.
CONNECT CONNECTOR
Hide quick links:
Advertisement
Table of Contents
