Download Print this page

Code -2641 Series User Manual

Vandal resistant reader

Download this manual

Other Products In The Range

Code

CODE-ME12

1 or 2 door controller with Ethernet connection

CODE-MS12

1 or 2 door controller with Serial connection

CODE-ME24

2 or 4 door controller with Ethernet connection

CODE-MS24

2 or 4 door controller with Serial connection

CODE-6800

5 Amp Power supply in Metal Box Enclosure

CODE-FC02

Card Distributor

CODE-MF01

Mifare Card

Description

CODE-2641 Series

Vandal Resistant Reader

USER MANUAL

Need help?

Do you have a question about the CODE-2641 Series and is the answer not in the manual?

Page 1 1 or 2 door controller with Serial connection CODE-ME24 2 or 4 door controller with Ethernet connection 2 or 4 door controller with Ethernet connection CODE-2641 Series Vandal Resistant Reader CODE-MS24 2 or 4 door controller with Serial connection 2 or 4 door controller with Serial connection...
Page 2 Product Specification Notes For Installation Packing List For the reader cable connection to the CODE Controller, CAT 5 cable or 8 core Name Note twisted pair cable can be used. CODE-2641 Vandal Reader User manual User Documentation The reader is normally installed at the right side of the door (outside) at a height Screw driver Φ20mm×60mm,Special for RF006...
Page 3 Wiring Connections Installation Procedure Colour Reader Wire Controller Connection Remove the back cover from the keypad using the supplied special screw driver Blue Connect with controller LED ”BUZ” input on controller BEEPER Yellow Connect with controller beeper Green WG output line D0 Gently pull the metal back plate cover away from the main body of the reader.
Page 4 • If there is no switching of the relay, then check the reader and the wiring. • Check the access software programming. If the Reader does not operate after a power down. • Please perform a controller download from the CODE Access Software...