Do-Not-Disturb /32; Handset Receive Volume Adjustment - Northern Telecom Unity Two-Line User Manual

32 / Programmable Features
Do-Not-Disturb
Handset
Receive Volume
Adjustment
Unity Two-Line is equipped with a volume control switch
The
that allows you to turn off the ringer. The red lights
beside the line keys will flash to visually indicate any incoming
calls.
To activate Do-Not-Disturb and turn off the ringer:
- Ensure that your telephone is idle and on-hook.
- Press the left side of the volume control repeatedly until the
two Feature-In-Use visual indicators labelled
red lights (LED's) let you know that you have turned the
ringer volume all the way down.
To cancel Do-Not-Disturb and turn the ringer back on, repeat-
edly press the right side of the volume control until you have
the desired ringer loudness.
In addition to adjusting the speaker loudness for monitoring calls
and putting your phone in 'Do-Not-Disturb', the volume control
adjusts the handset receive volume. If the person at the other end
of the line speaks too loudly, turn the volume down by repeated-
ly pressing the left-hand side of the volume control. If you have
trouble hearing them, you can raise the volume by repeatedly
pressing the right-hand side of the volume control.
(LEDs)
light. These
'Ft'
Issue
1
Guide
I