Philips HI575 User Manual page 6

ENGLISH
6
General description (fig. 1)
A Turbo steam button 0 (HI575 only)
B Spray button T
C Shot-of-steam button 9
D Steam control
0 = no steam
1 = minimum steam
6 = maximum steam
E Auto shut-off light (HI575 only)
F Temperature light
G Carry case (HI575/571 only)
H Soft-touch handgrip (HI575 only)
I Cord clip
J Power unit
K Mode switch
∫ = cordless ironing
π
= storage position
ª = corded ironing
L Stand
M Stand clamp
N Filling cup
O Typeplate
P Soleplate
Q Water level window
R Temperature dial
S Calc-Clean button for cleaning/descaling
T Filling opening with cap
U Spray nozzle
Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
Check if the voltage indicated on the type plate corresponds to
the local mains voltage before you connect the appliance.
If the appliance is provided with an earthed plug, it must be
plugged into an earthed wall socket.
Do not use the appliance if the plug, the cord or the appliance
itself shows visible damage, or if the appliance has been dropped
or is leaking.
Check the cord regularly for possible damage.
If the mains cord is damaged, it must be replaced by Philips, a
service centre authorised by Philips or similarly qualified persons
in order to avoid a hazard.
Never leave the appliance unattended when it is connected to the
mains.
Never immerse the iron and the stand, if provided, in water.
Keep the appliance out of the reach of children.