Get Ready To No - no!no! HAIR LITE User Manual

Get Ready To no!no!
1 Your no!no! HAIR LITE comes to you
preassembled, with the Thermicon™ Tip already
inserted Simply remove the safety seal from the
Thermicon™ Tip socket
Figure 2: Remove the Seal
2 Always check the Thermicon™ Tip to make sure
it is intact Never use a tip if the wire is bent
or torn
Figure 3:
Bent thermodynamic wire
* For more information, see the Thermicon™ Tip
section
Figure 4:
Torn thermodynamic wire
3 Connect the power cord to the no!no! HAIR LITE
and then to the wall socket
Figure 5: Power Supply Connection
4 Turn the unit on by pushing the on/off button
found on the top of the unit, next to the power
cord connection You will need to press for a few
seconds until the blue signal light turns on
On/Off Button
& Signal Light
Figure 6: Turn on the button on your no!no! HAIR LITE
*The blue light will flicker until you start gliding.
7