Thermicon™ Tip - no!no! HAIR LITE User Manual

Thermicon™ Tips
To remove the Thermicon™ Tip, grasp it by both ends and gently pull it out of the socket To replace it with a
new tip, grasp it by both ends, line up the two small holes on the Thermicon™ Tip with the posts inside the
Thermicon™ Tip socket and push it gently but firmly into place Do not use force
no!no! HAIR
LITE device
Posts
Figure 11: Installing and removing the Thermicon™ Tip
Check the Thermicon™ Tip to make sure it is inserted correctly
Make sure the Thermicon™ Tip is pushed all the way into the socket
Figure 12
Always check the Thermicon™ Tip to make sure it is intact
Bent thermodynamic wire
Figure 13
1 0
Holes
Torn thermodynamic wire