Korg MR-1 User Manual page 5

AudioGate User's Guide
--------------------------------------------------------------------------------------------------------------------------------
4. In the "Destination" area, click the [Select] button and select the export-destination
folder.
5. Specify the desired output file format.
If the sample rate is set to "5.6MHz," the MR-1 will be unable to play back the file.
If the bit depth is set to "32 bit (float)" or if the file format is set to "AIFF", the
MR-1000 and MR-1 will be unable to play back the file. The MR-1000 and MR-1
will also be unable to play back the file if you export a "16-bit" file at a sampling
frequency of "88.2 kHz" or higher.
You can change the detail settings of the conversion algorithm by selecting
[Advanced Settings]. For more information, refer to "Advanced settings" (page
7).
--------------------------------------------------------------------------------------------------------------------------------
(4) Click
Page 5
Select the
export-destination
folder
(5) Select
KORG Inc.