1.
Clean out all dirt from the bed's attaching hardware and lubricate them to ease removal.
2.
Remove all bolts attaching the bed to the frame.
3.
As necessary, disconnect any wire harnesses connected to the bed.
4.
Unbolt the fuel filler neck from the bed opening.
5.
Lift the bed off of the frame.
6.
Installation is the reverse of removal.
7.
Be sure to use new bolts and other mounting hardware when installing. Replacement parts should be
of the same specification as the original parts; i.e. do not use Grade 5 bolts where Grade 8 bolts were
originally used.
Chassis and Cab Mount Bushings
REMOVAL & INSTALLATION
REMOVAL & INSTALLATION
HOW TO USE THIS BOOK
Pickup bed and mounting hardware
Click to enlarge
1097