Relay Recording And Double Slot Recording; Checking The Remaining Recording Time On The Sd Card - Canon EOS C100 Mark II Instruction Manual

Relay Recording and Double Slot Recording

The camcorder features two useful SD card recording methods, relay recording and double slot recording.
Relay recording: This allows you to continue recording on another SD card if the SD card you are using becomes
full. Relay recording is available from SD card slot A to SD card slot B, and vice versa.
Double slot recording: This records the same clip simultaneously to both SD cards, which is a convenient way to
make a backup copy of your recording while you record.
Operating modes:
To use relay recording
By default, this function is activated. If it has been deactivated, follow the
procedure below to activate it.
1 Open the [Relay Rec] submenu.
[w Other Functions] > [Relay Recording]
2 Select [On] and then press the joystick.
To use double slot recording
1 Open the [Double Slot Rec] submenu.
[w Other Functions] > [Double Slot Recording]
2 Select the desired option and then press the joystick.
• 4 will appear on the top of the screen. 4 and the remaining
recording time for double slot recording will appear on the left of the
screen.
Options
[On]: Records the clip to both SD cards. Both clips use the same video configuration.
[MP4 (4 Mbps)]: Records the clip to both SD cards. The second clip (the one recorded to the SD card that is not
selected) is recorded in MP4 at 4 Mbps with a resolution of 1280x720.
[MP4 (3 Mbps)]: The second clip is recorded in MP4 at 3 Mbps with a resolution of 640x360.
[Off]: Deactivates double slot recording.
NOTES
• [MP4 (4 Mbps)] and [MP4 (3 Mbps)] are not available for AVCHD clips at 28 Mbps or MP4 clips at 35 Mbps.
• If an SD card becomes full during double slot recording, recording on both SD cards will stop. On the other
hand, if an error occurs with one of the SD cards, recording will continue on the other SD card.
• Double slot recording cannot be used with relay recording or slow & fast motion recording. While double slot
recording is activated, you cannot use the [w Other Functions] > [Delete Last Clip] setting to delete the last
clip recorded.

Checking the Remaining Recording Time on the SD Card

When the camcorder is in
is in use and the available recording time (in minutes*) that remains on each SD card.
On the [Media] status screen (A 178), you can check the total space, SD speed class, used space, available
recording time** and available number of photos on each of the SD cards.
* The approximate available recording time is based on the current bit rate (A 54).
**The available recording time will appear on the status screen only in
mode, the display on the upper left of the screen indicates which SD card slot
[w Other Functions]
[Relay Recording]
[w Other Functions]
[Double Slot Recording]
mode.
Using an SD Card
43
[On]
[Off]