Advertisement
Using another keyboard as the 'Lower Manual'
...Taking advantage of the two independent tone generators:
Using a short MIDI cable, connect the MIDI Out of any MIDI keyboard/controller to the MIDI In of the CX-3 and set its
1.
MIDI channel to Ch. 2.
The parameter for the MIDI Channel of the CX-3's Lower tone generator defaults to Ch 2, but it can be set to any
2.
channel: Press GLOBAL, then press key #4, and CURSOR [>] four times until the display reads "MIDI Lower Rx ch:".
If you call up a Program that has an active Split (SPLIT Key is lit), press the SPLIT Key once to turn it off. You now have
3.
a dual-manual tonewheel organ, with each manual having its own fully-polyphonic (61-note) tone generator.set of
drawbars!
Overview of the Edit Mode Groups
Group 1
LEVELS
Group 2
DRAWBARS
Group 3
PERC
Group 4
AMP
Group 5
REVERB
Group 6
ROTARY
Group 7
SPLIT PT/PEDAL
Group 8
NAME
Brief Explanation of Extended Drawbar Mode
...The CX-3 is the only organ to extend the harmonic possibilities of the tone wheel organ tradition!
Drawbar set #1 is governing the levels of the standard nine harmonics of a traditional tonewheel organ, while Drawbar set #2
controls the extended harmonics of EX Mode. This included four additional tone generator harmonics, and four additional
percussion tone harmonics.
•
The first four drawbars of set #2 add additional, higher harmonics to the basic tone-generating system. There are four
Presets for these extended harmonics. These tables can be found in GLOBAL mode, Page 8 > scroll right.
•
EX Drawbar #5, [2 2/3] controls the level of the entire traditional percussion section when it is ON.
•
EX Drawbars #6 and 7 provide 16' and 5 1/3' percussion harmonics; and EX Drawbars #8 and 9 provide a percussion
harmonic of the pitches assigned to EX Drawbars #1 and 2.
CX-3 Version 2 Features
•
Rebalanced drawbars for better performance across the full key range (Drawbar Level Curve="Mellow"). Original setting ("Bright") is
available for those that like the extra "scream" in the upper octaves.
•
Noise parameter added to recreate the standing-state noise of an old, beat-up organ when desired.
•
Improved Vibrato/Chorus emulation as well as Rotary Speaker algorithm improvements
•
Speaker simulator bypass in the Preamp for a whole new world of tonalities.
•
Added a 4
Reverb algorithm (Dark)
th
•
Added a three-drawbar sound source for the lower manual in EX mode, allowing for split-keyboard settings.
•
Pedal assignments can now be set to momentary or alternating and Wheel Brake "return" setting has been sped-up to better-emulate
the classic effect.
•
Selectable key triggering (Shallow and Deep) to allow tailored response of the keyboard based on a player's style
Output, tone wheel type, overtone level, leakage noise level, key on and key off click levels
Settings of the drawbar levels (some different parameters in EX Mode)
Percussion level, soft perc. Offset, normal perc, attenuation, perc fast decay, perc slow offset
Amp Type, Amp Gain, Tone: treble, middle and bass
Reverb type, time, mix level, and routing (before and after the Rotary effect)
Horn/Rotor balance, Horn and Rotor fast and slow speeds, Horn and Rotor Down, Up and Stop
transitions, miking characteristics
Split Point, Split Octaves, Pedal assignments (different parameters in EX Mode)
Rename the Program
5
CX3 EasyStart
Advertisement
