Yepzon GPS Locator Quick Manual

Yepzon Quick-Guide
®
Front Back
Strap Loop
NFC tag Micro USB Connector
Charging
The Yepzon includes a standard Micro USB
connector, which is located at the back o the device
(top right ig.) under a rubber plug. We recommend
charging the Yepzon's battery be ore using the
device or the irst time. It takes approx. 2 hours to
charge the battery ull. You can use any approved
Micro USB charger.
Beginning to Use Your Device
There are two options to connect your new Yepzon
to your device (smart phone or tablet): NFC (Android
and Windows Phone) or Bluetooth (iOS).
Please note that you can only connect your device
to a Yepzon, which has not been connected to
another device. I you want to monitor a Yepzon
already connected to a device, skip to section
Access and Control.
Android and Windows Phone
1. Veri y that the NFC eature has been enabled
on your phone.
Android: Settings - Wireless & Networks - NFC
Windows Phone: Settings - NFC - Tap to share
2. Install the Yepzon App.
You can install the App rom your phone
manu acturer's application store. Get a direct link
to it by scanning the NFC tag on your Yepzon
device. (I you do not know the location o the NFC
antenna on your phone, please check your phone's
user manual.) Receive the content. Then you will
be directed to the phone manu acturer's
application store where you can install the Yepzon
App.
3. Start the App.
4. Add a Yepzon.
I you already have Yepzons that you are
monitoring, select "+" to add a new one.
5. Scan the Yepzon's NFC tag.
The App will show a noti ication: "New Yepzon detected."
Select "Connect." (Windows Phone: Choose "Reject" i the
phone prompts you to receive the content.)
6. Add a name and picture or your Yepzon
(optional).
A view will display where you can choose to give
your Yepzon a descriptive name (recommended)
and add a picture. Snap one using your camera or
select one rom your phone's memory. The name
and the picture will not be stored on the Yepzon
server.
7. The Yepzon is now connected to your phone.
iOS
1. Veri y that Bluetooth has been enabled on your
phone.
iOS: Settings - Bluetooth.
2. Install the Yepzon App.
You can install the Yepzon App rom App Store.
3. Connect your Yepzon to a charger.
4. Start the App.
5. Add a Yepzon.
Select "+" to add a Yepzon. Your phone's Bluetooth
unction will locate any Yepzons near you waiting
to be connected. The App will prompt you to enter
the last 5 digits o the IMEI number on the Yepzon
to be connected. You can ind the IMEI number on
the back o your Yepzon.
6. Add a name and picture or your Yepzon
(optional).
A view will display where you can choose to give
your Yepzon a descriptive name (recommended)
and add a picture. Snap one using your camera or
select one rom your phone's memory. The name
and the picture will not be stored on the Yepzon
server.
7. The Yepzon is now connected to your phone.
Registering
You can register your Yepzon using the Yepzon App. You are
not required to register as a Yepzon user but we strongly
recommend doing so.
Once you have registered your Yepzon, you can start using it
again i the connected phone is lost or damaged and you
have not shared control o the Yepzon with other devices.
Access and Control
We strongly recommend sharing control o each Yepzon
device with another guardian or a riend. Once the Yepzon
has been connected to one device, it is not possible to
connect it again to another device (using NFC or Bluetooth)
without irst disabling the existing connection. Otherwise,
any passer-by could connect their own phone to the Yepzon
carried by your child, as an example.
I you have assigned control o the Yepzon to one phone
only and said phone is lost or damaged, the connection
cannot be disabled and the Yepzon can no longer be
connected to other devices!
Check the Yepzon App or instructions on how to share
control rom each Yepzon's own menu. Example - Windows
Phone: Swipe to the "Access Management" page. In this
view, you can review and share the control privileges. You
can share the privileges via NFC, i your phone supports it
(Android and WP), or via e-mail. When sharing privileges via
e-mail, the message contains a link to installing the App plus
a one-time link valid or 24 hours to the control privileges o
the Yepzon in question.
Location
I you wish to locate the Yepzon, open it rom the App and
select "Locate Now". The App will show you the status o the
device and ask i you want to start location. I you agree, the
location request is sent to the Yepzon the next time it
re reshes its status. The map view will show your own
location and the last known location o the Yepzon. At the
same time, the top o the screen will display the time
remaining be ore the Yepzon will re resh its status, receive
the location request, and start satnav.
Yepzon uses a network o GSM base stations and GPS
satnav to determine its location. I the device is indoors, or i
the GPS signal is not strong enough, the GPS location data
may not be received. In this case, a speci ic location cannot
be determined.