Advertisement
4) Select"Change filament", click "M"of button plat, it will appear: Load Right
5)
Select "Unload right", click "M"of button plat, it will appear: I'm heating up, my
extruder! the temperature of right nozzle is warming now, when it reaches 220℃, nozzle will
start work, if it does work, you can click several times of "M"until the nozzle working (left
nozzle put out ABS/PLA Unload Left, other steps is same as right nozzle)
1) First, the STL file guided into our printing software to generate G-code.
2) When G-code finished, click the third button (create a print file though SD)
3) Save it in desktop, then find the S3G format guide to SD card
4) When S3G format guide to SD card, put the SD card into the machine SD card socked.(on the
bottom right of the front of the machine).Then LED will appear: Build from SD
5) Select "Build from SD' , click "M" right button of the machine， select the S3G format file you
need, Then click "M" ，then will come out the bottom plate and the nozzle in the heated state.
When the temperature is OK , you can print
7) SD card print
Preheat
Utilities
Unload Right
Load Left
Unload Left
6)
Advertisement
