Summary of Contents for Kingjet Duplicator 3
- Page 1 Desk-top 3Dprinter Operating Instructions 1.Unpacking Guid 5. Two heads print 2.Install the printer driver 6.Put in/out material 3.General parameter settings 7.SD card print 4.Connect printer...
-
Page 2: Unpacking Guide
Unpacking Guide 1) Remove the plug at top of the rectangular tray, then out of laminated cardboard circumference around the printer. 2) Out of the printer, open the printer small box, out of toolkit and nozzles. 3) Install the nozzle according to the chart below shows (using the supplied tools) in the plastic rail. - Page 3 Install the printer driver 1) Install JAVA driver 2) Install PYTHON driver 3) Install PYSCO driver 4) Install 3G graph driver...
-
Page 4: General Parameter Settings
General parameter settings... -
Page 5: Connect Printer
1) Slice configuration select: replicator slicing defaults 2) Select the left and right nozzle print, If select left, the left nozzle will print. If select right nozzle, the right nozzle will print. 3) If your sample is vacant structure, you need to select printer support. NONE is not need support, EXTERIOR... - Page 6 4) Multiple scans does not appear to serial port shall be driven: Right-click the computer----Attribute---Device Manager 6) Click the replicator right-hand button, select update driver software, select browse my computer for driver software.
- Page 7 7) Click browse software location, click drivers file’s ftdi USB drivers and confirm it, then click next, re-scan the serial port. 8) Click on the button of “link the printer”when the frame turns green, it mean successful connection. Two-head printing 1) Open replicator G operating software, then click “gcode”, select last column double-headed merger print.
- Page 8 2) Click double-head merger printer. “stl” option will appear the following dialog box 3) Left nozzle click browse, find the file of “replicatorg-0038”, click “examples”select Two _color of dual _world_a.stl 4) Right nozzle click browse, find the file of “ replicatorg-0038”,click “examples”select the Two_ Color of dual _world_b.stl...
- Page 9 5) Save it in desktop, suffix named “. gcode” 6) Click “merge” ,will appear two dialog box of “G” code, remove “√” of base/support, and then one by one generate G-code 7) When generate finished, start two colors printing...
- Page 10 Put in /out material Put in ABS/PLA : 1) Turn on the power of printer, the printer LED screen will appear: Build from SD Preheat Utilities 2) Select “Utilities”, click “M”of button plat , it will appear: Montior Mde Change filament Level Build Plate Home Axes 3) Select”Change filament”, click “M”of button plat, it will appear: Load Right...
-
Page 11: Sd Card Print
4) Select“Change filament”, click “M”of button plat, it will appear: Load Right Unload Right Load Left Unload Left Select “Unload right”, click “M”of button plat, it will appear: I’m heating up, my extruder! the temperature of right nozzle is warming now, when it reaches 220℃, nozzle will start work, if it does work, you can click several times of “M”until the nozzle working (left nozzle put out ABS/PLA Unload Left, other steps is same as right nozzle) 7) SD card print...