Table of Contents
Advertisement
ii. Press "Back" key to return to standby status.
b.
Reset accumulation charges:
i.
In standby status of prepaid mode or postpaid mode, press "F3" key, the LCD shows "ENTER
PASSWORD". Input the 8-digit user's password (the initial user password is 64139025).
ii. Press "OK" key. If the password is error, the LCD indicates "PASSWORD ERROR" and returns
to standby status. If the password is correct, the LCD shows as follows:
iii. Press "1" key to reset accumulated charges. Press "0" key to return to standby status.
Notice: If the operation of "Reset Accumulated Charge" is successful, press "F2" key to inquire
accumulated charges, the LCD will display as follows:
6.
Inquire the dialed calls and the information of sent message.
a.
Enter menu "1: DIALED NUMBERS".
b.
The LCD shows the information of dialed calls and sent short message.
For dialed calls, it shows the information: call date, call time, call duration and call charge and call
number.
For sent short message, it shows the information: sending date, sending time and charge.
"****" indicate this entry is the information of a short message.
Office Address:
18-8-C, Gurney Tower, Persiaran Gurney, 10250 Penang, Malaysia. Tel: +604 - 228 9053
URL: http:// www.witura.com
ACCUMULATED CHARGE
TIMES:
08
USD:
18.00
RESET ACCUMULATED?
YES:1 NO:0
ACCUMULATED CHARGE
TIMES:
00
USD:
0.00
WITURA CORPORATION SDN BHD
- 9 -
Fax: +604 – 228 9054
Email: sales@witura.com
Advertisement
Table of Contents
