Witura WT2000-SS User Manual page 4

3. Power on
Connect the input end of the power adapter to main power socket, and the output end connects to the power
supply port of telephone. The telephone begins to search for the network, and the LCD shows "
SEARCHING FOR NETWORK""INITIALIZATION" in turn. When the LCD shows icons operator name,
time and the signal, etc., login is finished.
When the telephone is connected to external power supply through power adapter, LCD displays as follows:
Signal is good
Status of the telephone
Date
When there is no external power supply and batteries are being used, the icon ' ' with be replaced by the
icon ' '
Signal is weak
It is failed for the
telephone to logon
on network
Notice: Please charge when the warning icon for batteries appears. Otherwise the telephone will be halted.
Then all the telephone's functions will be ended. If the telephone has be halted, please connect the
telephone to external power supply and push the switch to "on" side, the telephone will work in
gear.
Office Address: 18-8-C, Gurney Tower, Persiaran Gurney, 10250 Penang, Malaysia. Tel: +604 - 228 9053
URL: http:// www.witura.com
Power adapter is being used
NETWORK NAME
STANDBY
01/01/2000 01:40
NETWORK NAME
STANDBY
01/01/2000 01:40
No signal
NO NETWORK
01/01/2000 01:40
WITURA CORPORATION SDN BHD
- 4 -
Name of service provider
Time
Batteries are being used
Warning icon for too low
voltage of batteries
Fax: +604 – 228 9054
Email: sales@witura.com