Table of Contents
Advertisement
c.
Press "OK" key to save the setting.
15. Ringing tones
Two levels are optional.
a.
Enter menu "RINGING TONES LEVEL".
b.
Press "1" key, ringing tone will be setup as high. Press "0" key, ringing tone will be setup as low.
16. Inquire IMEI code and software version and hardware version
Enter menu "IMEI-VERSION" key to inquire corresponding information.
17. Change user's password
a.
Enter menu "USER PASSWORD" key
b.
Input an 8-digit user's password (the initial user pas sword is 64139025). Press "OK" key. If
the password is error, LCD will display "PASSWORD ERROR" and returns to the previous
menu. If the password is correct, the LCD shows "CHANGE PASSWORD"
c.
Press "OK" key after input your new password, the LCD shows "REENTER PASSWORD",
input the new password again and press "OK" key. If the twice input password is the same,
the setting will be successful, the LCD display "CHANGED", otherwise the LCD will display
"FAILED" and return to the previous menu
Office Address:
18-8-C, Gurney Tower, Persiaran Gurney, 10250 Penang, Malaysia. Tel: +604 - 228 9053
URL: http:// www.witura.com
KEYPAD TONES
1:ON 0:OFF
RINGING TONE LEVEL
0:LOW
1:HIGH
IMEI:351249000337442
SOFTWARE: V02R01
HARDWARE: V11a
WITURA CORPORATION SDN BHD
- 15 -
1
1
Email: sales@witura.com
Fax: +604 – 228 9054
Advertisement
Table of Contents
