IBM ThinkPad T40 Hardware Maintenance Manual page 56

Product overview
Key
combination
Fn+F7
Fn+F8
(continued)
52
ThinkPad T40 Series (MT 2373, 2374, 2375, 2376)
Description
To enable this function in Windows 2000 and
Windows XP, the following procedure is
needed:
v When you log on to Windows 2000 and
Windows XP for the first time, press Fn+F7
and select a display-switching function in the
Initial setup window. In Windows 2000 and
Windows XP, multiple users can log on to a
single operating system by using different
user IDs. To enable this function, each user
needs to select the function in the initial
setup window when logging on for the first
time.
v If the Fn+F7 key combination have been
assigned to a presentation scheme function,
start Presentation Director, and change the
settings.
Applying a presentation scheme
Note: This function is supported only in
Windows 2000 or Windows XP.Apply a
presentation scheme directly, with no need to
start Presentation Director. To enable this
function, do as follows when you log on to
Windows 2000 or Windows XP for the first
time:
Note: In Windows 2000 and Windows XP,
multiple users can log on to a single operating
system by using different user IDs. To enable
this function, each user needs to do the
following procedures when logging on for the
first time.
1. Start Windows 2000 or Windows XP, and
log on to the system.
2. Press Fn+F7. The setting window opens.
3. Select the optional setting.
To disable this function and use the Fn+F7 key
combination for switching a display output
location, start Presentation director, and
change the settings.
Switch the computer screen size between
expanded mode and normal mode if the
computer display image is smaller than the
physical display.
Note: This function is not supported in
Windows 2000 and Windows XP.