Toro Power Max Heavy Duty 826 OXE Operator's Manual page 16

Figure 29
1. Ignition key
4. Firmly push in the primer with your thumb 2 times
(-9°C or 15°F or above) or 4 times (below –9°C or
15°F), holding the primer in for a second before
releasing it each time (Figure 30).
Figure 30
5. Rotate the choke to the Choke position (Figure 31).
6. Move the throttle to the Fast position (Figure 32).
7. Start the machine by pulling the recoil starter or
pressing the electric-starter button (Figure 33).
1. Electric-starter button
2. Electric starter plug
Note: To use the electric starter, connect a power
cord to the electric starter plug first and then to a
power outlet.
Important: To prevent damaging the electric
starter, run it in short cycles (5 seconds maximum,
then wait one minute before trying to start it
16
Figure 31
Figure 32
Figure 33
3. Recoil starter