Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Worx WG600E
Summary of Contents for Worx WG600E
- Page 1 SAFETY AND OPERATING MANUAL High pressure cleaner WG600E WG601E WG602E...
-
Page 2: General Power Tool Safety Warnings
The jet must not be directed at persons, live electrical equipment or the machine itself. WARNING: Do not use the machine within range of persons unless they wear protective clothing. High pressure cleaner WG600E WG601E WG602E... - Page 3 SYMBOLS WARNING! Do not direct the jet at persons, animals and electrical equipment. Read the manual Machine not suitable for connection to potable water mains Double insulation RCM approval mark High pressure cleaner WG600E WG601E WG602E...
- Page 4 High pressure cleaner WG600E WG601E WG602E...
-
Page 5: Technical Specifications
WG601e WG602e Voltage 220-240V~50Hz Power 1400W 1500W Rated pressure 70Bar 75Bar 80Bar Max. Pressure 1450psi(100Bar) 1595psi(110Bar) 1740psi(120Bar) Hose length Cable length Water flow rate 5.5L/MIN 6L/MIN Protection class / II Weight 4.5kg 4.9kg 5.3kg High pressure cleaner WG600E WG601E WG602E... - Page 6 We recommend that you purchase only original WORX accessories from the same store that sold you the tool. Choose the type of accessory according to the work you intend to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice.
-
Page 7: Operating Instructions
(See Fig.C) 4) Finally attach the wheels to the side of the machine. Once they are applied they are attached permanently. (See Fig. D) (WG601E WG602E Only) High pressure cleaner WG600E WG601E WG602E... - Page 8 Fixed spray general cleaning nozzle. applications. used in conjunction with lance. Provides detergent High suds for deeper pressure cleaning of dirt. foam Used in conjunction nozzle. with fixed spray nozzle and lance. High pressure cleaner WG600E WG601E WG602E...
- Page 9 Check that the nozzle is firmly attached by pulling on it. It should not pull out. Removing Press the lock button on the lance and pull out the nozzle. Release the lock button. (See Fig. H2) High pressure cleaner WG600E WG601E WG602E...
- Page 10 When foam nozzle is not in use it may be stored on the product. Located on the left side of the machine is a notch that the foam nozzle will slide into. (See Fig. L) High pressure cleaner WG600E WG601E WG602E...
-
Page 11: Operation
Note: Pay close attention to the amount of water in the bucket or water tank to ensure that there is an adequate supply of water to avoid running the pump dry. High pressure cleaner WG600E WG601E WG602E... - Page 12 13. Turn the on/off switch to “o” ( off ). flow into unwashed areas. 14. Turn water supply off. 4. If working on a large section of wall divide the wall into sections to be cleaned. 5. On some walls high pressure cleaning High pressure cleaner WG600E WG601E WG602E...
-
Page 13: Maintenance
6. Insert the rubber seal back into the water motion. Maintain a distance of at least filter/hose connector. 20cm away from the cleaning surface. If High pressure cleaner WG600E WG601E WG602E... - Page 14 Remove all debris, especially from the motor cooling vents. Store in a secure, dry place out of the reach of children. Do not place other objects on the product. High pressure cleaner WG600E WG601E WG602E...
-
Page 15: Troubleshooting
Please remember any process outside customer maintenance in which the product housing must be disassembled, must be carried out by qualified persons. If undertaken by anyone other than a qualified person the manufacturer has the right to void warranty. High pressure cleaner WG600E WG601E WG602E... - Page 16 Copyright © 2013, Positec. All Rights Reserved. 2SHW001PK11000A2...
Need help?
Do you have a question about the WG600E and is the answer not in the manual?
Questions and answers