Advertisement
Advertisement
Table of Contents
Related Manuals for Worx WG606E
Summary of Contents for Worx WG606E
- Page 1 SAFETY AND OPERATING MANUAL High pressure cleaner WG606E WG607E...
-
Page 2: General Power Tool Safety Warnings
The jet must not be directed at persons, live electrical equipment or the machine itself. WARNING: Do not use the machine within range of persons unless they wear protective clothing. High pressure cleaner WG606E WG607E... - Page 3 SYMBOLS WARNING! Do not direct the jet at persons, animals and electrical equipment. Read the manual Machine not suitable for connection to potable water mains Double insulation RCM approval mark High pressure cleaner WG606E WG607E...
- Page 4 High pressure cleaner WG606E WG607E...
- Page 5 PUMP INLET WATER FILTER HOSE REEL (FOR WG607E) STORAGE FOR HIGH PRESSURE FOAM NOZZLE WHEEL SRORAGE FOR MAINS CONNECTION CABLE (FOR WG606E) 10. STORAGE FOR NOZZLES 11. HIGH PRESSURE HOSE CONNECTION (FOR WG606E) 12. TRIGGER GUN 13. TRIGGER SAFEFY LOCK 14.
-
Page 6: Technical Specifications
Rotary brush Patio cleaner We recommend that you purchase only original WORX accessories from the same store that sold you the tool. Choose the type of accessory according to the work you intend to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. -
Page 7: Operating Instructions
After the hose is attached, check the connection by gently pulling upon the hose. It should not pull out. NOTE: The operation is not apply for WG607E as the pressure hose has already been assembled on the washer . High pressure cleaner WG606E WG607E... - Page 8 Rotor pressure direct (turbo) spray for cleaning. nozzle used in conjunction with lance Adjustable By rotating the Nozzle adjustable knob to (Only for control the degree of WG607E) spray and pressure of spray during operation High pressure cleaner WG606E WG607E...
- Page 9 Press the lock button on the lance and pull out the nozzle. Release the lock button (See Fig. H2) 2. HIGH PRESSURE FOAM NOZZLE Put the hose in the detergent bottle, and tighten the nozzle clockwise. High pressure cleaner WG606E WG607E...
- Page 10 Pull gently on the rotary brush to confirm it is secure. It should not pull out. Next, attach the adapter to the l trigger gun by aligning the ridges on the adapter with the grooves in the trigger gun. High pressure cleaner WG606E WG607E...
-
Page 11: Operation
NOTE: Pay close attention to the amount of water in the bucket or water tank to ensure that there is an adequate supply of water to avoid running the pump dry. High pressure cleaner WG606E WG607E... - Page 12 14. Turn water supply off using the rotor (turbo) nozzle might not be General Operation the best solution for cleaning dirt especially if the surface is painted or has delicate • Before each use check the product, its High pressure cleaner WG606E WG607E...
-
Page 13: Maintenance
6. Insert the rubber seal back into the water Maintain a distance of at least 20cm filter/hose connector away from the cleaning surface. If using a High pressure cleaner WG606E WG607E... - Page 14 Remove all debris, especially from the motor cooling vents. Store in a secure, dry place out of the reach of children. Do not place other objects on the product. High pressure cleaner WG606E WG607E...
-
Page 15: Troubleshooting
Please remember any process outside customer maintenance in which the product housing must be disassembled, must be carried out by qualified persons. If undertaken by anyone other than a qualified person the manufacturer has the right to void warranty. High pressure cleaner WG606E WG607E... - Page 16 Copyright © 2014, Positec. All Rights Reserved. 2SHW011PK11000A0...
Need help?
Do you have a question about the WG606E and is the answer not in the manual?
Questions and answers