BIANCHI VENDING BVM971 Use And Maintenance Manual page 44

Test w/o
Sugar It performs an option drink without sugar
Full test After pressing this key in line 2 the word test
is displayed and the machine is in stand by for
the selection, at the end of the preparation
the machine exits the test state and returns
to the maintenance state.
Water test In line 2, the word water Test is displayed
and the machine is in stand by for selection.
The selection will be performed by reset-
ting all soup , while the test of drinks with
expresso coffee is complete, at the end of
preparation the machine exits the water test
state and returns to the maintenance state.
Test ground
coffee Pressing this key, in line 2 the ground test is
displayed and the distributor will perform a
grinding and later the doser release. In this
way the operator will check the grade and
the grammace of the ground dose.
Reset failures All alarms are reset and the diagnosis of
Automatic distributor is performed . In line
2 the Reset message is displayed for T of 2
seconds.
Mixer Test Switching of the Mixer for 5 sec. in the fol-
lowing order 1,2,3,4,5,6
Group rotation It performs a rotation of the coffee group.
Alarm
scrolling It is used to scroll alarms and signallings.
If there are signallings, they are displayed
in line 2 as soon as maintenance starts, if
there are no signallings the line 2 is white.
The display during the maintenance state
does not automatically update; to update it,
this key must be pressed again.
Total selections The total unresettable selections are displayed
for a T of 2 seconds after which we return to
the maintenance state
Spoon release It releases a spoon
It turns column It allows the rotation of the column
Cup Cup release
Clean.. 1st FB Cleaning 1st piston FB
Clean. 2nd FB Cleaning 2nd piston FB
Reset decount It allows to reset the decounters at the initial
value. It must be a double pressure.
Fill. tubes MDB Fill. tubes MDB
It depletes tubes MDB
Test Micro switches Pressing the key you enter the test state of
micro switches. In this state, pressing the
micro switch to be tested, the card master
performs a BEEP confi rming its operation.
Coin 1 (Key X depletes)...
Coin 16 (Key X depletes)
44