Table of Contents
Advertisement
USE OF THE
ACCESSORIES
1° Battery charger for use on wall-socket mains
The battery is made up or 6 nicke -cadmium accumulator cells; they
are leakproof and soldered within a metal container which screws
directly into the camera housing's "battery"
compartment.
Capacity:
250 mAlhrs. This type
of
battery is a standard feature on all Beaulieu
cinecameras bearing serial numbers of 851.268or over.
It can be
recharged from the wall socket by means of the charger unit
supplied with every camera.(47)
Procedure:
a) place the voltage control on 110 or 220 V according to
supply.
b) place the power switch in position A or B.
c) connect the charger plug with the camera jack
socket.
d) plug the charger into the wall socket (AC mains
only).
IMPORTANT:
Be sure to carry out these operations In the right order, and more
especially to plug the charger Into the camera Jack first and only
therafter to connect to the mains.
.
The superiority of nickel- cadmium batteries essentially lies in the
fact that they deliver a constant voltage, call for little or no
mainte-
nance, and have a practically unlimited life.
When fully Charged,
they will power the camera
for:
-about
7 to 10 films at 18 fps between +100 and +50°C (500 -
122OF).
- about 2 films at 18 fps at - 10°C
(14OF).
TABLE OF NORMAL CHARGING TIMES
After shooting
Charging·
time required
2 films
4 hours
4 films
7 hours
6 films
9 hours
8 films
11 hours
10 films
14 hours
37
Hide quick links:
Advertisement
Table of Contents
