BEAULIEU 4008 ZM II User Manual page 10

_,.-,-_=-.."..-........,7
B Safety-catch position
Useful during travel or when the camera is carried in the hand.
The plunger being in position
(A),
pull it out slightly (without
reaching the red dot) until the metal pin appears: press on the
broad end of the pin, thus locking the plunger in the "off" posi-
tion. To release, press on the smaller end of the pin.
C Continuous action position (exceptional)
For remote-control filming - by cable or radio - or for filming
oneself. Pull the plunger out until the red dot appears. Per-
manent electric contact is established. Lock the push-button
release, and control the camera's action either by radio or by
means of the cable switch.
Whim a tripod is used for filming in position
(C)
without a remote-
control device, starting and stopping must be controlled with
the push-button release, either manually or with a .cable release.
E : Release button
(and cable-release socket)
This has three positions:
(7)
- "Free": the film does not move.
- *
"Depressed": this position puts the film in ·motion.
- *
"Depressed and turned
gOO
clockwise": this position
locks the release button and allows continuous filming.
The female thread in the center of the button receives the cable
release.
*
Providing the power-supply switch
(D)
is in position
(A)
or
(C).
10