Advertisement
3
1/ Configure your computer network
.
The Internet Protocol properties should be set to:
•
- obtain an IP address automatically
- obtain DNS server address automatically
Please consult your computer system instructions in order to
configure the Internet Protocol properties as needed because
the configuration process & information varies depending on
you computer OS and version. Also: this is for Ethernet
configuration only; USB configuration slightly differs, please
contact technical support for more information.
Installation
2/ Connect your equipment
As described on the 'Connexion Map' page
•
Due to auto configuration mode, the modem may self-reboot, so please wait until
•
the DSL and VOIP lights are both green and steady (about 5 mn)
3/ Login procedure
The login information is auto-configured in your modem. You do not have to enter
•
any id/password, even at first use. Just visit a Web site (e.g., www.google.com) to
check that everything works fine.
If not, please contact technical support (see contact n° on page 6) with the ADSL
•
user name and password (as mentioned on the first page of this doc).
4/ Connect your phone
See next page
•
Advertisement
