Troubleshooting - Konica Minolta DYNAX40M Instruction Manual

TROUBLESHOOTING

Contact your nearest Konica Minolta Service Facility if the following
information does not cover the problem or the condition continues.
Problem
Autofocus does not
work when the
shutter-release
button is pressed
partway down.
Shutter cannot be
released.
Flash fires when
the shutter-release
button is pressed
partway down.
Picture is blurred.
58 T
ROUBLESHOOTING
Cause
A special focusing
situation is
preventing the AF
system from
focusing (p. 22).
Camera is set to
manual focus.
Subject is too
close.
Focus cannot be
confirmed.
Camera is attached
to a microscope or
telescope.
Flash was used as
AF illuminator to
assist the autofocus
system.
Flash did not fire in
a low-light situation
and the shutter
speed was slow.
Solution
Use focus lock (p.
23) or manual
focus (p. 47).
Change the focus
mode (p. 47).
Check the lens'
minimum focus
distance.
Use focus lock (p.
23) or manual
focus (p. 47).
Turn off shutter lock
(p. 53).
To turn off the AF
illuminator or set
the flash mode to
flash cancel.
Use fill flash, a
tripod, or faster
film.