Accessory Flash Notes; Wireless Controller Ir-1N - Konica Minolta DYNAX40M Instruction Manual

ACCESSORY FLASH NOTES

When using an accessory flash, the viewfinder flash signals are the
same for the built-in flash (p. 25). The following flash units are
compatible with this camera:
Program/Maxxum Flash 5600HS (D)
Program/Maxxum Flash 3600HS (D)
Program/Maxxum Flash 2500 (D)
Contact your Konica Minolta dealer for information on these
products.
The flash mode of a mounted
accessory flash can be set by
1
pressing the flash-mode button (1) on
the camera. The flash mode is
displayed on the data panel.
Do not use the built-in or accessory flash when using a filter with a
filter factor greater than 0, a close-up lens, or the focus-range limiter
or macro release on certain lenses. This will result in an incorrect
exposure.

WIRELESS CONTROLLER IR-1N

The camera can be permanently damaged if used with the Wireless
Controller IR-1N.
56 A
CCESSORY NOTES