Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS - DUAL FUEL
PRODUCTS WITH CAST IRON LID
(WHERE FITTED)
A 55mm clearance is required from the
back of the hotplate to the rear wall, to
allow the lid to be opened fully. To ensure
this clearance is maintained, the infill
piece (supplied) should be fitted using the
instructions below.
Fix the infill piece to the wall - using suit-
able screws and wall fixings (not supplied)
- and ensure it is level with the hotplate
as shown.
Note: The 55mm clearance dimension
should not be reduced.
550mm
55mm
Hide quick links:
Advertisement
Table of Contents
