LCD MONITOR DISPLAY
CAMERA-SHAKE WARNING
22
R
-
ECORDING
BASIC OPERATION
Recording mode
Flash modes (p. 28)
Automatic digital subject program display (p. 25)
Image size (p. 42)
Image quality (p. 42)
Battery-condition indicator (p. 16)
Focus frame
Drive mode (p. 37)
Frame counter (p. 43)
Camera-shake warning
Focus signal (p. 27)
If the shutter speed falls below the point where the camera can be
hand held safely, the camera-shake warning indicator will appear
on the monitor and the viewfinder indicator lamp will turn orange
and blink slowly. Camera shake is slight blurring caused by subtle
hand motion and is more pronounced at the telephoto position of
the lens than at the wide-angle position. Although the warning
appears, the shutter can still be released. If the warning appears,
place the camera on a tripod or use the built-in flash.