Selecting The Flash/Macro Mode - Konica Minolta REVIO KD-420Z User Manual

Selecting the Flash/Macro Mode

- You can set the flash mode and macro that best suits the subject.
- Once a mode is set, you can shoot continuously. It is recommended that
the mode should be returned t o AUTO mode (no display) after shooting.
- Also, when you turn the camera OFF, the macro-mode you set is canceled
and the camera automatically returns to AUTO-mode shooting operation
(no display). But the flash-mode setting remains in effect even if you switch
the power OFF and back ON.
Pressing enables the selection of the following modes.
1) AUTO (Automatic Flash)
2) Fill-In
3) Off (Flash Override)
• Every time is pressed, the mode symbol will be displayed one by one, through
the list.
Pressing enables the selection of the following modes.
1) AUTO mode (no display)
2) Macro-photo mode
• Every time is pressed, the mode symbol will be displayed one by one, through
the list.
44
1. Turn the power on so that the
LCD monitor is lit.
2. By pressing
the desired mode icon on the
LCD monitor.
(p.45)
(p.45)
(p.46)
(p.45)
(p.46)
or , bring up