4. Operating Modes and Applications
4.1 Introduction
Operating Mode
Broadcast Mode
User-defined Route
(Typical)
User-defined Route
(Back-up Route)
Mode
Mode
ZB-2510 Series User Manual, Ver. 1.2
Description
Establish used of the network routing path is
automatically generated.
Refer to Broadcast Mode
Each repeater uses a unique routing path to
forward data. The repeater path needs to be
pre-configured.
Refer to User-defined Route Mode
If a problem occurs on the current routing
path, data will be automatically switched to
another routing path. Two routing paths can
be configured.
Refer to User-defined Route Mode with a
back-p Route
Page 8