Troubleshooting - Minolta Dimage RD 3000 Instruction Manual

Refer to these pages to determine the cause of a problem you are experiencing with
your camera. If the information does not cover the problem which you are experienc-
ing or the condition continues, contact your nearest Minolta Service Facility.
PROBLEM
NO DISPLAY APPEARS
WHEN THE CAMERA IS
SWITCHED ON
AUTOFOCUS DOES NOT
WORK WHEN SHUTTER-
RELEASE BUTTON IS
PRESSED PARTWAY DOWN
SHUTTER CAN NOT BE
RELEASED
FLASH PICTURE IS TOO
DARK

TROUBLESHOOTING

CAUSE
Batteries are loaded incorrectly
Batteries are exhausted
Camera malfunction
Situation is unsuitable for
autofocus
Camera is set to the manual
focus mode
Subject is too close
Focus can not be confirmed
Subject is beyond flash range
120
SOLUTION
Remove and reinsert the
batteries.
If the camera battery is
exhausted, install a new battery.
Turn the camera off, then remove
and reinsert the batteries.
If normal operation does not
resume or the camera
malfunctions repeatedly, contact
an authorized Minolta Service
Facility.
Use focus hold or manual focus.
Set to the autofocus mode by
pressing the focus mode button.
Check the minimum focus
distance for your lens.
Use focus hold, or manual focus.
Make sure the subject is within
the flash range.