CHANGING THE REMOTE CONTROL BATTERY
The remote control uses a 3V lithium battery (CR2032). When pressing the remote-
control buttons does not release the shutter, the battery must be replaced. A new bat-
tery should be sufficient for around ten years of operation.
KEEP BATTERIES THAT COULD BE SWALLOWED AWAY FROM
YOUNG CHILDREN. CONTACT A DOCTOR IMMEDIATELY IF A
BATTERY IS SWALLOWED.
ADDITIONAL FEATURES
1
Pull out the battery chamber and
remove the old battery.
2
Insert a new battery into the bat-
tery chamber with its plus side
up.
3
Slide the battery chamber back
into the remote control.
WARNING
71