Battery Conditioner - Ferrari 458 Italia Owner's Manual

Hide thumbs Also See for 458 Italia:
Table of Contents

Advertisement

- adjust the clock (date and time on instrument panel);
- close both doors and fully raise the driver side and passenger side
windows to their upper limit; check that the windows move down
to the "target position" when the doors are opened.
Warning
WAIT at least 1 minute before inserting the key in the ignition
switch.
Before starting the engine, wait at least 60 second with the
ignition key in position II to allow the electronic system that
controls the motor-driven valves and the AC ECU to run a self-
acquisition process.
During this period, no devices must be activated.
The Motronic ECU self-acquisition cycle will only function correctly
when the intake air temperature is above 5 °C (41 °F).
After removing the battery from the vehicle or disconnecting it
from the electrical system using the battery master switch, it is
important to check that the external temperature is within the
indicated values when reconnecting before performing the self-
acquisition cycle.
Advice for Emergency Situations
200

Battery conditioner

The vehicle is equipped with a battery conditioner to maintain and
recharge the battery.
Important note
Using the battery conditioner will extend the life of the battery.
The device is kept in a pocket inside the car cover bag supplied
with the vehicle.
The battery conditioner connection socket
dashboard on the passenger side.
Warning
Place the battery conditioner where it can be easily seen away
from heat sources and out of children's reach.
D
D
is located under the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents