Time Period Programming; Overview - 1 Source S1-THEU21P7S Owner's Manual

OWNER'S MANUAL

Time Period Programming

Overview

PROGRAM BUTTON
Press the PROGRAM button to enter the time
time period programming screens.
The blinking icon(s) on the display may be
changed by pressing the COOLER or
WARMER buttons.
After the blinking icon is changed to the desired
selection, press the NEXT button.
Each item in the time period programming screens will flash
and can be modified with the COOLER & WARMER buttons.
Continue the steps above until programming is complete.
Press the PROGRAM button twice to exit the programming
screens and operate the thermostat according to the time
period programming.
Press the PROGRAM button once to exit the programming
screens and operate the thermostat as a manual heat or cool
only thermostat.
S1-THEU21P7S
PROGRAM
Page 9
OFF
RUN
SET