Copying The Program - 1 Source S1-THEU21P7S Owner's Manual

OWNER'S MANUAL
Time Period Programming

Copying the Program

The copy command becomes available after
programming the entire previous day.
Select Yes to copy
the previous day's
program to the day
displayed.
If Yes is selected:
Selecting Yes, then pressing NEXT
Press
will copy the previous day's program.
If yes is selected again, or each time,
NEXT
this routine will repeat.
If No is selected, as in previous steps, flashing prompts for
input will appear for the four time periods for the next day.
After programming for all seven days is
PROGRAM
complete, press the PROGRAM button to
OFF
leave the Setup screens. If no buttons are
RUN
pressed, the display will leave the setup
SET
screens after 60 seconds.
S1-THEU21P7S
Tu
Page 13
If No is selected:
Press
NEXT