1. Manuals
  2. Brands
  3. ETen Manuals
  4. Handhelds
  5. glowfiish M700
  6. User manual

ETen glowfiish M700 User Manual

Gps pocket pc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
G
P
S
P
o
c
k
e
t
P
C
U
s
e
r
M
a
n
u
a
l
G
P
S
P
o
c
k
e
t
P
C
U
s
e
r
M
a
n
u
a
l

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the glowfiish M700 and is the answer not in the manual?

Questions and answers

Related Manuals for ETen glowfiish M700

Summary of Contents for ETen glowfiish M700

  • Page 2: Safety Instructions

    Safety Instructions ♥ Please Read Before Proceeding. ♥ This product is not charged when shipped from the factory. When you use this product the first time, we recommend that you install the battery as illustrated and fully charge it for about 8 hours before use. ♥...

  • Page 3: Table Of Contents

    .............2 AFETY NSTRUCTIONS ..........2 HERE TO NFORMATION Getting Started / ..............1-1 ACKAGE ONTENT ..............1-2 XTERNAL IEWS QWERTY Keyboard ............1-3 Hardware Hotkey Functions..........1-4 Rear Side................1-5 ......1-6 SING THE OCKET FOR THE IRST Charging Power and Power Supply ........1-6 Re-installation or Replacing the Battery ......1-8 ..............1-9 OWER N AND...
  • Page 4 Using the Pocket PC / ..................2-1 TART Screen................2-1 Today Screen..............2-3 Programs .................2-6 System Application Programs..........2-8 ..................2-10 PC......2-13 NTER NFORMATION ON OCKET Using QWERTY Keyboard ..........2-14 Enter Text Using the Input Panel ........2-17 Type with the Soft Keyboard........2-19 Use Letter Recognizer ..........2-19 Use Block Recognizer ..........2-19 Use Transcriber............2-20 Select Typed Text ............2-20...
  • Page 5 Voice Command Satellite Navigation / ........3-1 AVIGATION EVICE NSTALLATION GPS N ......3-2 AVIGATION OFTWARE NSTALLATION GPS C .....3-2 ONDITIONS FOR SING AVIGATION ............3-5 ATELLITE PDATE SMS................3-8 OCATION GPS V ................3-10 IEWER Using the Phone / SIM C ......4-2 NSTALLING AND EMOVING THE ..............4-4 SING THE...
  • Page 6 Speed Dial................4-18 Hot Key Switch............4-18 Frequently Dialed Screen ........4-19 Index Dial ..............4-20 Call Filter ................4-21 Skype Receiver Switch .............4-24 Customize Your Pocket PC / ...............5-1 DJUSTING ETTINGS .................5-2 OTIFICATIONS ..........5-3 OWER REFERENCE ETTINGS ................5-4 ACKLIGHT ................5-5 ICROPHONE ..............5-6 DJUST OLUME ................5-7 CENARIOS ................5-8...
  • Page 7 Connections / ..........7-1 ONNECTING TO THE NTERNET Connection Wizard ............7-1 Setting the GPRS Connection ..........7-3 Starting GPRS Connection ..........7-5 Disconnecting GPRS ............7-6 ..............7-7 SING LUETOOTH Bluetooth Connection Wizard..........7-7 Bluetooth Connection Setting ..........7-9 Service ..............7-10 Serial Port ..............7-11 Bluetooth Headset............7-12 FTP Sharing .............7-12 CSD T ................7-13 ......7-14...
  • Page 8 Sending and Receiving Messages / SMS M ..........9-1 MAILS AND ESSAGES Synchronizing E-mail Messages ........9-2 Connecting Directly to the Mail Server......9-3 E-mail Server Setup ............9-4 Using E-mails and SMS ...........9-5 Direct Push Technology Alert .........9-8 Direct Push Technology Alert Settings ....9-8 MSN M ..............9-10 ESSENGER...
  • Page 9 ............10-8 ULTIMEDIA ANAGER Preview Multimedia Information........10-8 Slide Show Function ............10-9 Multimedia Manager Tools ..........10-10 ................10-11 MAGE AKER ................10-13 MAGE IZARD FM T ................10-14 UNER Companion Programs / ..11-2 ALENDAR CHEDULING PPOINTMENTS AND EETINGS Create an Appointment ............11-3 Use the Summary Screen ..........11-4 Create Meeting Requests ..........11-4 Schedule a Meeting..........11-5 ....11-6...
  • Page 10 ..............11-24 NTERNET XPLORE Using Internet Explore ............11-24 Browse the Internet..........11-25 View Mobile Favorites and Channels .....11-26 The Mobile Favorites Folder...........11-26 Favorite Links ..............11-27 Synchronize Mobile Favorites .........11-27 Create a Mobile Favorite .........11-27 Save Pocket PC Memory .........11-28 Maintaining the Pocket PC / ..............12-1 ACKUP TILITY...
  • Page 11 ..............12-11 ANAGE EMORY View Memory Status ............12-11 Find Available Memory ...........12-12 .............12-15 YSTEM NFORMATION Voice Commander / ..........13-2 TARTING OICE OMMANDER ............13-3 OICE OMMAND ORMAT ..........13-5 OICE OMMANDER ETTINGS Contacts Settings Page ............13-5 Application Settings Page..........13-8 Music Settings Page............13-10 Digit Training Settings Page ...........13-12 Advanced Settings Page...........13-14 FAQ ..................13-15 Specifications /...
  • Page 12 X-10...

  • Page 13: Getting Started

    Package Content Pocket PC, stylus, Battery, Getting Started CD, User Guide, AC adapter, USB cable, headset and Leather case. Pocket PC Stylus Battery Getting Started CD User Guide USB Cable AC Adapter Getting Started 1-1...

  • Page 14: External Views

    External Views 1 Volume control key 2 Voice Commander 3 Earphone and microphone jack 4 WLAN Active LED (Orange) Bluetooth Active LED (Blue, blinks once) GPS Active LED (Blue, blinks twice) 5 Cell Phone speaker 6 Power Charging LED (Red) Cell phone Active LED (Green) 7 Hot key reserved for GPS AP 8 M-Desk hot key...

  • Page 15: Qwerty Keyboard

    QWERTY Keyboard Close Open Getting Started 1-3...

  • Page 16: Hardware Hotkey Functions

    Hardware Hotkey Functions Hardware Short Press Long Press Button (Press once and release) (Press for a few seconds and release) Adjust volume Zoom in/out during camera mode Connect to Voice Commander Connect to Notes Hot key reserved for GPS AP Connect to M-Desk Left Soft-Key: Soft-keys on left and right to operate function buttons at...

  • Page 17: Rear Side

    Rear Side 1 Insert the SIM card into the SIM 2 Main battery card slot with its golden contacts facing down. Follow the picture indicated on the Pocket PC. 3 Back cover 4 Follow the direction in the illustration to install the main battery.

  • Page 18: Using The Pocket Pc For The First Time

    Using the Pocket PC for the First Time Charging Power and Power Supply Connect the AC adapter plug to any household power outlet. Connect the other plug from the AC adapter to the USB port. The Pocket PC starts to charge automatically. If you need to connect Pocket PC and desktop computer, you could connect the USB cable to the USB port on the bottom of the Pocket PC.
  • Page 19 3. Please connect one side of the AC adapter plug to any household power outlet and connect the other side of plug from the AC adapter to the USB port. The Pocket PC will start to charge automatically. 4. Cold Boot: Press and hold the “Power Button” with one hand, and use the stylus tip to press the “Reset Button”...

  • Page 20: Re-Installation Or Replacing The Battery

    Re-installation or Replacing the Battery If the phone, GPRS or wireless LAN connection function is already activated, deactivate it first and then replace the battery. 1. Slide and remove the back cover of Pocket PC. 2. You may poke down to unlock the main battery lock in order to remove the battery.

  • Page 21: Power On And Off

    Power On and Off Power Button Sleep Mode 1. Press the “Power Button” of the Pocket PC to enter the Sleep mode. At this time, the screen is turned off and all peripheral devices enter the power-saving mode. But if the phone is turned on, it is still in the call waiting mode.

  • Page 22: Turn On The Screen

    Turn on the Screen This product is designed with a power-saving feature. If the screen is turned off, press the “Power Button” of the Pocket PC to turn it on. If the screen is too dark and you cannot see clearly, set the proper brightness level for the backlight.

  • Page 23: Restarting The Pocket Pc

    Restarting the Pocket PC Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen. For your consideration, factoring into your safety and convenience, please refer to the following instructions in order: 1.

  • Page 24: Reset

    Reset Reset method: Press the “Reset Button” of Pocket PC with the tip of the stylus. Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen. Result: In a moment, when Pocket PC automatically completes the system startup process, the last display will be the Today screen.

  • Page 25: Default Settings

    Default Settings , Programs, Utilities, and then Default Settings. 1. If this application is inadvertently accessed, please select the the upper right of the screen to exit, the system will not be affected. 2. If you are certain that you wish to perform this action, please select the data input block on the right, and enter the authorized code in the...

  • Page 26: Clean Boot

    Clean Boot Cold boot method: Hold the “Power Button” of the Pocket PC with one hand while holding the stylus tip to push in the “Reset Button” with the other. Simultaneously release both the “Power Button” and “Reset Button”. Appropriate situation: If a previous reset has already been attempted and the Pocket PC is still unable to maintain normal operations, has no response, or if the screen is frozen.
  • Page 27 Perform cold boot and hold the End Button . The system will display a two question inquiry screen. Please refer to the following instructions before careful consideration. 1. Erase all data and load default? (The default is “No.” If Yes or No was not selected, after a few seconds the system will automatically execute the default No.) If you long press Left Soft-Key for a few...
  • Page 28 Caution! 1. After performing a cold boot, the system will retain Microsoft Windows and pre-installed programs. If you answer “Yes” to the two questions displayed after a cold boot, other items such as the user’s input data, newly installed programs and user settings will be lost. 2.

  • Page 29: Using The Pocket Pc

    Start Screen , Settings, the System tab, and then Screen. The first time you use or cold boot the pocket PC, the system will ask you to align the screen. Kindly continue to tap the center of each cross (+) that appears and follow the screen instructions to complete the operation.
  • Page 30 The following steps will bring you into the touch screen calibration mode. These steps provide a faster and more efficacious way to enter the touch screen calibration mode. And they also provide a method of getting into Screen program for when the touch screen dislocation is so severe that you completely cannot select or do anything using the stylus.

  • Page 31: Today Screen

    Today Screen When you turn on your Pocket PC for the first time each day (or after 4 hours of inactivity), you will see the “Today screen”. You can also display it by tapping and then Today. On the “Today screen”, you can see at a glance the important information for the day.
  • Page 32 The following table lists the icons that you may see on the Navigation Bar or the Command Bar. Kindly refer to the “Meaning” column for explanation or tap on the icon to access the instant message. Meaning Icon (Located on the Navigation Bar at the top of the screen) Speaker is on Speaker is off Main battery is charging.
  • Page 33 Meaning Icon (Located on the Navigation Bar at the top of the screen) Wireless LAN Active Wireless LAN Data Calling Wireless LAN in use Meaning Icon (Located on the Command Bar at the bottom of the screen) General Mode. Set the scenario suitable for each environment. Meeting Mode.

  • Page 34: Programs

    Programs You can switch from one program to another by selecting it from the menu. (You can customize which programs you see on this menu. For information, see “Adjusting Settings” section.) To access some programs, you’ll need to tap , Programs, and then the program name. Icon Programs Description...
  • Page 35 Icon Programs Description Messaging Send and receive e-mail messages. Internet Explorer Browse Web and WAP sites, and download new programs and files from the Internet. Pocket MSN MSN related programs. For example, send and receive instant messages with your MSN Messenger contacts. Word Mobile Create new documents or view and edit Word documents created on your...

  • Page 36: System Application Programs

    System Application Programs , Settings, the Personal tab Program Description Buttons Set the hot key for Pocket PC hardware button. Input Set the details about the input method. Menus Set the items displaying on the Start menu. MSN Options Set the details about Pocket MSN. Owner Information Input owner information.
  • Page 37 , Settings, the System tab Program Description About Display the important information about the Pocket Backlight Set the details about the backlight and brightness. Certificates For network identification to prevent unauthorized access. Clock & Alarms Set the time and alarms. Memory View the memory usage, and the list of running programs, etc.

  • Page 38: M-Desk

    M-Desk Press the hot key on the upper part of the Pocket PC to link to M-Desk. , Programs, Utilities, and then M-Desk. You can categorize programs or even change the background picture on the panel according to your personal preferences. Categorizing, renaming, deleting or editing the text color of program names under M-Desk will not affect the default setting of the Pocket PC.
  • Page 39 System category screen This category already has these programs that are automatically selected by the system which you cannot move or delete. All relevant information is updated automatically. If no storage card is installed, its icon changes to gray and will be marked with a red Change screen orientation.
  • Page 40 Choose Style screen Exit Choose Style screen. Viewing area. View the previous or next picture. Tap Options and then Classify Config to enter the Categories Setup screen. 2-12...

  • Page 41: Enter Information On Your Pocket Pc

    Enter Information on Your Pocket PC You have several options for entering new information: 1. Use the input panel to enter typed text, either by using the soft keyboard or other input method. 2. Write directly on the screen. 3. Draw pictures on the screen. 4.

  • Page 42: Using Qwerty Keyboard

    Using QWERTY Keyboard The keyboard layout of this product is standard US keyboard (as used on PCs). The keyboard is located underneath the screen of the Pocket PC. You can slide the display to access the keyboard. The screen automatically switches to landscape display at the same time to facilitate data input in the Notepad, Word Mobile, Excel Mobile and other applications.
  • Page 43 Standard Keyboard Operation Functions Lower Case of You can input data in the lower case when no Letters function key is activated. 1. If you want to input the upper case of a letter, Upper Case of press and then release key, the first letter Letters you input will be in upper case, while the rest of...
  • Page 44 Standard Keyboard Operation Functions Press Latin 1 Letters Input a letter and press keys at the same time. The system will convert the letter into the corresponding Latin 1 letters. Press both keys continually until the desired letter appear on the screen. Release both keys. Start Menu Press key to cascade the Start menu.

  • Page 45: Enter Text Using The Input Panel

    Enter Text Using the Input Panel Use the input panel to enter information in any program on your Pocket PC. You can either type using the soft keyboard or write using Letter Recognizer, Block Recognizer, or Transcriber. In either case, the characters appear as typed text on the screen.
  • Page 46 When you use the input panel, your Pocket PC anticipates the word you are typing or writing and displays it above the input panel. When you tap the displayed word, it is inserted into your text at the insertion point. The more you use your Pocket PC, the more words it learns to anticipate.

  • Page 47: Type With The Soft Keyboard

    Type with the Soft Keyboard 1. Tap the arrow next to the Input Panel button and then Keyboard. 2. On the soft keyboard that is displayed, tap the keys with your stylus. Use Letter Recognizer With Letter Recognizer you can write letters using the stylus just as you would on paper.

  • Page 48: Use Transcriber

    Use Transcriber With Transcriber you can write anywhere on the screen using the stylus just as you would on paper. Unlike Letter Recognizer and Block Recognizer, you can write a sentence or more of information. Then, pause and let Transcriber change the written characters to typed characters. 1.

  • Page 49: Write On The Screen

    Write on the Screen In any program that accepts writing, such as the Notes program, and in the Notes tab in Calendar, Contacts, and Tasks, you can use your stylus to write directly on the screen. Write the way you do on paper. You can edit and format what you’ve written and convert the information to text at a later time.

  • Page 50: Select Writing

    Select Writing If you want to edit or format writing, you must select it first. 1. Tap and hold the stylus next to the text you want to select until the insertion point appears. 2. Without lifting, drag the stylus across the text you want to select. If you accidentally write on the screen, tap Menu, then Undo and try again.
  • Page 51 If the conversion is incorrect, you can select different words from a list of alternates or return to the original writing. To do so, tap and hold the incorrect word (tap one word at a time). On the pop-up menu, tap Alternates. A menu with a list of alternate words appears.

  • Page 52: Draw On The Screen

    Draw on the Screen You can draw on the screen in the same way that you write on the screen. The difference between writing and drawing on the screen is how you select items and how they can be edited. For example, selected drawings can be resized, while writing cannot.

  • Page 53: Select A Drawing

    Select a Drawing If you want to edit or format a drawing, you must select it first. Tap and hold the stylus on the drawing until the selection handle appears. To select multiple drawings, tapping Menu and then Draw to deselect it and then drag to select the drawings you want.

  • Page 54: Create A Recording

    Create a Recording 1. Hold your Pocket PC’s microphone near your mouth or other source of sound. 2. Press and hold the Record hardware button on your Pocket PC until you hear a beep. 3. While holding down the Record button, make your recording. 4.

  • Page 55: Use My Text

    Use My Text When using Messaging or MSN Messenger, use My Text to quickly insert preset or frequently used messages into the text entry area. To insert a message, tap My Text and tap a message. Tap to select a prewritten message. You can add text after inserting a My Text message before sending it.

  • Page 56: Voice Commander

    Voice Commander By default, the system sets the button on the side of the Pocket PC as the “Voice Commander Button.” Press this button to launch the Voice Commander. For Voice Commander Button details on how to use this function, please refer to the Voice Commander section.

  • Page 57: Voice Command Satellite Navigation

    Navigation Device Installation Pocket PC Car Charger (* optional): when Pocket PC is low on power, recharge by connecting one end to the car cigarette lighter/12 volt power outlet and the other end to the socket on base of Pocket PC. Attention: The GPS signal receiver is built into the Pocket PC.

  • Page 58: Gps Navigation Software Installation

    GPS Navigation Software Installation Please follow your car navigation system operating manual’s instructions on software installation in order to use the navigation function. Conditions for Using GPS Car Navigation By using this system you are agreeing to the following conditions: 1.
  • Page 59 2. Please set navigation destination before driving. Do not operate this system while driving. 3. Please use this system with care. If any harm results from careless use of this system, the responsibility for safe driving resides with the driver. 4.
  • Page 60 10. The route provided by the navigation system, the audio cues and intersection data are derived from recommended optimal route calculated using the electronic map data. This is provided for the driver’s reference only, the driver should decide their chosen route according to actual road conditions.

  • Page 61: Satellite Data Update

    Satellite Data Update , Programs, GPS, and then Satellite Data Update. Login to the provider’s server to download instant satellite data and enable the GPS function. Note: either of the following connections allows your Pocket PC to download the latest GPS data. If there is more than one connection available, the system will automatically select the best connection, in the following order: 1.
  • Page 62 Tap the Download Button to update the GPS data manually. The figure on the left shows how to download using the ActiveSync connection. Tap the Setting Button in the Satellite Data Update main screen to open the dialog in the left figure. Check the expiration checkbox to activate the reminder function on the due date.
  • Page 63 When the GPS data has expired, the relevant message displays on the top of the screen. The icon reminds you that your GPS data has expired. Tap the Notification Button to open the message window. Tap to close the message window. Voice Command Satellite Navigation 3-7...

  • Page 64: Location Sms

    Location SMS , Programs, GPS, and then Location SMS. You can utilize the GPS function offered by your Pocket PC, to send the matching location automatically found by this program and the necessary message to your contacts. This could be helpful in preventing kidnapping, reporting disastrous situations, calling for help in emergencies or locating an individual.
  • Page 65 2. Select in the main screen, once in the screen shown on the left, tap on any message and tap OK Button to select. Further, by pressing and holding anywhere on the screen, together with the pop-up menu, you can add, edit or delete your most used messages.

  • Page 66: Gps Viewer

    GPS Viewer , Programs, GPS, and then GPS Viewer. You may use this Pocket PC to automatically search the GPS coordinates of your location and check if the GPS functions work properly. 1. Run this program in a location with good signal reception.

  • Page 67: Using The Phone

    The Phone feature on the Pocket PC allows you to perform the following tasks: Make and receive calls. Quickly make calls or listen to voice mail without entering phone numbers using Contacts, Speed Dial, or your Call Log. Check the Call Log to see who has called, whom you have called, add a new number to Contacts, and access notes taken while you were on a call.

  • Page 68: Installing And Removing The Sim Card

    Installing and Removing the SIM Card 1 Insert the SIM card into the SIM 2 Main battery card slot with its golden contacts facing down. Follow the picture indicated on the Pocket PC. 3 Back cover 4 Follow the direction in the picture to install the main battery.
  • Page 69 1. Tap the ALL OFF Button in Wireless Manager to turn off your Pocket PC’s mobile phone, Bluetooth, and wireless LAN functions. 2. Press the “Power Button” of the Pocket PC to turn off the screen. 3. Remove the back cover, unlock the main battery lock and remove the battery.

  • Page 70: Using The Phone

    Using the Phone Microphone Earphone Phone Speaker Phone Microphone (Bottom of Pocket PC) Combination Answer or Adjust Earphone Operation Method End a Call Volume Hold the Press Send Button While answering a Hold the Pocket Pocket PC PC and position End Button on call, push the manually...

  • Page 71: Adjusting The Phone Volume

    Adjusting the Phone Volume on the top and adjust all programs’ sound functions under . Adjust the phone sound volume under 1. When there is no call, you can push the volume control key on the side of the Pocket PC or use the stylus to tap the speaker icon and then to adjust...

  • Page 72: Turning The Phone On Or Off And Making Calls

    Turning the Phone On or Off and Making Calls Adjust earphone volume Rear side: The SIM card is located below the battery. Send Button End Button 1. Open the Pocket PC back cover and remove the main battery. 2. Install the SIM card properly. As shown in the direction on the Pocket PC, pay attention to the position of the cut corner on the SIM card when you insert it into the card slot.
  • Page 73 The following table shows the icons that you may see on the Navigation Bar on the top of the screen. Signal Indicator Description SIM card unavailable. The phone is turned off. To turn it on, tap this icon. Network is searching or unavailable. Phone connection unavailable or network error.

  • Page 74: Toolbar

    Toolbar Provides the functional tools. 1. Contacts Button: Link to Contacts. 2. Menu Button Save to Contacts: Save the dialed phone number to Contacts. Create Note: While making a call, you can enter Notes to use the panel as the memo pad for writing down notes, pictures or recording.

  • Page 75: Call From Contacts

    Call from Contacts Phone numbers entered in Contacts can be used to quickly locate phone numbers and make calls. 1. In the contact list, tap and hold the contact to display a pop-up menu. 2. Tap Call Mobile or Call Work on the pop-up menu.

  • Page 76: Call From The Call History

    Call from the Call History Tap Call History Button on the Phone screen to enter the following screen. Tap Menu and then Filter to list the categories. To search, tap By Caller and follow the screen instructions to complete the operation.

  • Page 77: Customize Your Phone

    Customize Your Phone Tap Menu, Options, and then the Phone, Services, Network, Skin, Appreciation software or Others tabs to modify the relevant service setup. Note that the setup values you can change here depend on the services provided by your telephone company. Tap the Appreciation software tab.

  • Page 78: Add Ringtone

    Tap Menu, Options, and then the Phone tab. You can set the ring type as ring, vibration or mute. If you want to use a customized ring tone file, use the ActiveSync program on your desktop computer to copy the .wav ring tone file to the /Windows/Rings folder on the Pocket PC.

  • Page 79: Phone Application Programs

    Phone Application Programs Caution! Before you can use the functions described in the Phone Group. Make sure that the SIM card is properly installed in your Pocket PC and the Phone is already turned on. SIM Manager If your Pocket PC does not include this function, it means it is not supported and you can skip this chapter.

  • Page 80: Full-Screen Display

    The following are the shared functions for standard screen or fullscreen display: Standard Button: Provides Standard, SIM, Contacts three switching modes. Menu Button: Provides the appropriate function table. SMS Management: Enter the SMS management screen. New SIM Contact: Add a new phonebook entry to the SIM card. Refresh: Tap to refresh the displayed contacts and SIM card information, after the Contacts are updated.

  • Page 81: Copy Phonebook Information

    Copy Phonebook Information The function descriptions of this section are for standard screen and fullscreen display. Copying phonebook information between the SIM card and Contacts is either by “select one, select multiple, or select all” methods. For precise management of your phonebook that can be conveniently performed.

  • Page 82: Sms Management

    SMS Management Tap Menu and then SMS Management to enter the SMS management screen and to display the original SMS contents on the SIM card. Double tap the number in the Pos. column to view the corresponding SMS contents. Tap the SMS you want to delete. When it is highlighted, tap Del selected SMS Button to delete this message from the SIM card.

  • Page 83: Sms Sender

    SMS Sender , Programs, Phone, and then SMS Sender. , Messaging, and then New. Enter the composing SMS screen in Messaging. “Text Messages” means you are editing SMS. Input the mobile phone number. Input the messages you want to send. Tap Menu and then My Text to select canned messages or to edit your Text Messages.

  • Page 84: Speed Dial

    Speed Dial , Programs, Phone, and then Speed Dial. Hot Key Switch Tap the box according to the functions provided by the system. View Button: to switch between these functions: Frequency Dial → Index Dial. Tools Button: Provides the relevant menu.

  • Page 85: Frequently Dialed Screen

    Frequently Dialed Screen Frequency Dial screen Tap View Button to switch to the Frequency Dial screen as shown on the left. Tap any phone entry box to speed dial. Tap and hold the box, then select appropriate command from the pop-up menu.

  • Page 86: Index Dial

    Index Dial Index Dial screen Tap View Button to switch to the Index Dial screen as shown on the left. Tap on any letters. The content displayed are the data created in Contacts. If you did not create any data in Contacts, the screen is blank.

  • Page 87: Call Filter

    Call Filter , Programs, Phone, and then Call Filter. Add New List Button to add a new Block List. Tap and hold an entry in the list. Select from the pop-up menu to manage the list according to your needs. Add New List to add a new Allow List.
  • Page 88 Add New List Button in the Call Filter screen to enter the screen shown on the left. Input name and telephone number. Add to Block List or Allow List. OK Button Cancel Button Tap and hold a contact in the Contacts screen.
  • Page 89 Tap the icon on the lower right of the Today screen to display the Call Filter Status window. Display Call Filter setting status. Tap to hide the Call Filter Status window. Using the Phone 4-23...

  • Page 90: Skype Receiver Switch

    Skype Receiver Switch , Programs, Phone, Skype Receiver Switch, and then Skype Receiver Switch tab. If you download the Skype software, you can use Skype Receiver Switch to configure your calls to suit your requirement. 1. The system will automatically detect the connection to head-set/mic and enable the usage of such devices.

  • Page 91: Customize Your Pocket Pc

    You can adjust the Pocket PC settings according to your personal preferences and install other programs. Adjusting Settings To see available options, tap , Settings, then the Personal or System tab located at the bottom of the screen. The following utilities allow you to adjust the settings based on your personal work style.

  • Page 92: Notifications

    Notifications Your Pocket PC reminds you in a variety of ways when you have something to do. For example, if you’ve set up an appointment in Calendar, a task with a due date in Tasks, or an alarm in Clock & Alarms, you’ll be notified in any of the following ways: A message box appears on the screen.

  • Page 93: Power Preference Settings

    Power Preference Settings , Settings, the System tab, and then Power. View the power usage condition or perform the relevant power management settings. Power icon Check this item, so that when you accidentally press the hardware buttons on the Pocket PC, the Pocket PC will not exit the sleep mode.

  • Page 94: Backlight

    Backlight , Settings, the System tab, and then Backlight. 1. Battery Power or External Power tab: Set the relevant backlight functions. 2. Backlight Level tab: Adjust the backlight level.

  • Page 95: Microphone

    Microphone Profile Microphone Cause * Voice Turn the volume down and find Surrounding the proper volume setting for interference recorded Commander voice control better recognition of system. when volume up. Speech Turn the volume up. More distance from the recording lecturer more interference recorded.

  • Page 96: Adjust Volume

    Adjust Volume Push the volume control key on the side of the Pocket PC. Or use the stylus to tap the icon on the top of the screen to adjust all program sound functions under . Adjust the phone volume under 1.

  • Page 97: Scenarios

    Scenarios , Programs, Phone, and then Scenarios. You can tap any Scenarios icon in the Today screen to enter Scenarios. After selecting a mode, this will become the Scenarios icon you selected. Check this item to activate Scenarios. Select an applicable mode. Check this item to display the Scenarios mode icon in the Today screen.

  • Page 98: Quick Link

    Quick Link , Settings, the Personal tab, Today, the Items tab, and then check Quick Link. Items tab: Enter the Today setting screen with Quick Link Options. Make sure that Quick Link is checked so that the Today screen can display this item. Options Button: Check and select Quick Link to highlight it, and then tap Options to enter its...
  • Page 99 Tap the Advanced tab to enter the screen shown on the left. Set to enable or disable the use of the Big Icon. Tap on arrowhead to select the number of lines for displaying Quick Link. The icons of the programs you checked in the General tab are displayed in this area.

  • Page 100: Find And Organize Information

    Find and Organize Information The Search feature on your Pocket PC helps you quickly locate information. 1. Tap , Programs, and then Search. Input the text you want to find and then select the data type. Tap on Search to start the search. 2.

  • Page 101: Navigation Bar And Command Bar

    Navigation Bar and Command Bar The navigation bar is located at the top of the screen. It displays the active program and current time, and allows you to switch to programs and close screens. Use the command bar at the bottom of the screen to perform tasks in programs.

  • Page 102: Pop-Up Menus

    Pop-up menus With pop-up menus, you can quickly choose an action for an item. For example, you can use the pop-up menu in the contact list to quickly delete a contact, make a copy of a contact, or send an e-mail message to a contact. The actions in the pop-up menus vary from program to program.

  • Page 103: Redefine Hot Keys

    Redefine Hot Keys , Settings, the Personal tab, and then Buttons. These hot keys can be redefined as launch keys for frequently used programs. End Button and Send Button are exclusive phone functions so they cannot be redefined. Customize Your Pocket PC 5-13...
  • Page 104 5-14...

  • Page 105: Microsoft Activesync

    ® ® , you can synchronize the information on Using Microsoft ActiveSync your desktop computer with the information on your device. Synchronization compares the data on your device with your desktop computer and updates both computers with the most recent information. For example: Keep Pocket Outlook data up-to-date by synchronizing your Pocket PC with Microsoft Outlook data on your desktop computer.

  • Page 106: Installing And Using Activesync

    Installing and Using ActiveSync Important Installation Notice Before you install ActiveSync, make sure that the USB cable on the Pocket PC is not connected to the personal computer. Connect the USB cable only after ActiveSync is installed. 1. Installing ActiveSync: You could use the Getting Started CD to install Microsoft ActiveSync version 4.1 or above on the personal computer.
  • Page 107 3. Using ActiveSync After installation is complete, the ActiveSync Setup Wizard helps you customize your synchronization settings. Once you use the USB cable to connect the two devices properly, the Set Up a Partnership screen appears on the personal computer. Set it up according to your requirements.

  • Page 108: Activesync Frequently Asked Questions

    ActiveSync Frequently Asked Questions , Settings, the Connections tab, and then USB to PC. 1. Factory setting defaults to checking the box. 2. If you have followed the above installation and operation procedures and find that the connection between your Pocket PC and desktop PC still cannot be established, please uncheck the box shown on the left.
  • Page 109 ActiveSync synchronization settings: 1. After installation is complete, the Setup Wizard will continue to guide you. Adjust the specifications according to your actual needs. 2. Use the USB cable to connect the two devices properly and the Set Up a Partnership screen appears on the personal computer.
  • Page 110 Click Finish. After installation is complete, the ActiveSync Setup Wizard helps you connect your Pocket PC to your desktop computer, set up a partnership so you can synchronize information between your Pocket PC and your desktop computer, and customize your synchronization settings. Your first synchronization process will automatically begin when you finish using the wizard.

  • Page 111: Synchronizing Using Bluetooth

    Once you have set up ActiveSync and completed the first synchronization process, you can initiate synchronization from your Pocket PC. To switch to ActiveSync on your Pocket PC, tap , and then tap ActiveSync. For more information on how to use ActiveSync on your personal computer, run ActiveSync and refer to the ActiveSync online help.

  • Page 113: Connecting To The Internet

    Connecting to the Internet This section teaches you how to use GPRS wireless network connection. GPRS wireless networking is a convenient function for working at home or while traveling. You can use the Pocket PC to browse websites and read or send E-mails, SMS or MSN messages.
  • Page 114 , Settings, the Connections tab, and then Connection Wizard. 1. Select the country name from the list. 2. Select the carrier name from the list. 3. According to actual requirements, select the carrier name, and then tap Add Button or Edit Button. Or use the New Button to add the new network connection.

  • Page 115: Setting The Gprs Connection

    Setting the GPRS Connection , Settings, the Connections tab, Connections, and then the Tasks tab. 1. As shown in the screen on the left tap “Add a new modem connection.” 2. Enter the “Make New Connection” screen as shown in the screen on the left.
  • Page 116 3. Input the Access Point Name provided by your telecom company and tap Next. 4. Input your personal information such as account number, and tap Finish.

  • Page 117: Starting Gprs Connection

    Starting GPRS Connection 1. Tap the icon at the top of the screen and when a message window appears tap “Turn off flight mode” and input your PIN to turn on the Phone. The icon will change to while the icon changes to 2.

  • Page 118: Disconnecting Gprs

    Disconnecting GPRS 1. Disconnect GPRS: Tap and the message window appears. Tap Disconnect. 2. Turn off Phone: Tap and the message window appears. Tap “Turn on flight mode.”...

  • Page 119: Using Bluetooth

    Using Bluetooth Bluetooth is a short-distance wireless communication technology with an effective range under 10 meters (30 feet). When you enable Bluetooth function, the blue LED blinks once every 4 seconds. Bluetooth LED indicator (Blue) 1.Tap Wireless Manager 2.Tap to enable Bluetooth Bluetooth Connection Wizard , Programs, Utilities, and then Bluetooth Manager.
  • Page 120 All nearby Bluetooth devices found by the system. Tap on any one of the shortcut icons and you will be able to follow the on-screen instructions to pair with that particular device. Devices that have already been paired with are shown with a Tap on one of the icons which represent a Bluetooth headset, when a...

  • Page 121: Bluetooth Connection Setting

    Bluetooth Connection Setting Tap Settings Button in the Bluetooth Wizard screen to display the Bluetooth Settings screen. Tap the General tab 1. Bluetooth Status Tap Open to enable Bluetooth function. Tap Close to disable Bluetooth function. Make sure that you disable Bluetooth function when you need to save power or if you are in locations such as an airplane or...

  • Page 122: Service

    Service Tap the Service tab Provide the settings about services of serial port, file transport and exchange vCard. 7-10...

  • Page 123: Serial Port

    Serial Port If you have Bluetooth GPS software, use the product as instructed and refer to the accompanied documentation and this section to register your Pocket PC as an effective serial port or search for other serial ports. Tap the Serial Port tab Register new serial port 1.

  • Page 124: Bluetooth Headset

    Bluetooth Headset Tap the Bluetooth Headset tab 1. Select a headset from the paired list. 2. Check “Use Headset.” FTP Sharing Tap the FTP tab Specify one of the folders on your Pocket PC as a shared directory. 7-12...

  • Page 125: Csd Type

    CSD Type , Settings, the Connections tab, and then CSD Type. You must first apply for Circuit-Switched Data (CSD) service from your telecom company before you can use this function. In short, this function is similar to the modem dial-up in a personal computer. By simulating the Pocket PC as a modem and connecting through the built-in GSM device, you can use the Pocket PC to access the web.

  • Page 126: Connecting With A Personal Computer

    Connecting with a Personal Computer For more information, refer to “Microsoft ActiveSync” section. Wireless LAN Transmission Tap the Wireless Manager icon on the lower right corner of the Today screen. For more information, refer to “Using Wireless LAN” section. Wireless LAN LED indicator (Orange) Wireless Manager 7-14...

  • Page 127: Using Wireless Lan

    Connecting to Wireless LAN This section teaches you how to use the Pocket PC’s built-in wireless LAN function to connect to the Internet. It is convenient for you to browse websites and send/receive E-mails through wireless networks at certain locations where wireless networking services are provided. When you purchase credits for connecting to the Internet through a wireless LAN, you will be given the following information: an IP address, DNS name server address, Proxy server, port, and network key, etc.
  • Page 128 Select the icon on the bottom right of the Today screen. , Programs and then Wireless Manager. This icon will show up on your screen whenever your Pocket PC has detected a usable wireless network and has connected to that network, indicating that your Pocket PC has successfully connected to the network hotspot...

  • Page 129: Configure Your Wireless Network

    Configure Your Wireless Network WLAN Setup Scenarios Location Select Networks Proxy Connection Network key or Access Point Home 1. Close Proxy 1. Authentication: , Settings, the Connections tab, connection Select Open Connections, the 2. Not required to 2. Data Advanced tab, Select set Proxy Encryption: Networks Button, and...

  • Page 130: Configure Your Wireless Network

    Configure Your Wireless Network (Reference for a normal network setup) You will need a correct IP address, DNS name server address, Proxy server, and connection port number to setup your connection. If you have purchased a wireless Internet service account, then the service desk at the location where you will be connecting will provide you with this information, or, you should obtain this information from the network administrator of your company.
  • Page 131 4. As shown on the left, make sure that My Work Network is selected for both items, and finally tap to save and exit. My Work Network is the WLAN connection method. As this option is from a choice of two, the next time you need to use the GPRS connection, you will have to refer to the above listed steps, select My...
  • Page 132 7. Select name of a currently available network to enter the WLAN authorization setup screen. 8. Set accordingly to the rules and information provided by the hotspot location. Authentication: Select Open Data Encryption: Select WEP to enable the entry bar about Network Network key Network index 9.

  • Page 133: Configure Your Wireless Network

    Configure Your Wireless Network (Reference for Proxy setup) To successfully configure your network, you will need the following information: a correct IP address, DNS name server address, Proxy server, and connection port number, etc. Please obtain the above listed information from your company’s network administrator.
  • Page 134 The above is applicable to an office environment that requires a Proxy setup. For others that close the proxy connection, please do not check the box named “This network connects to the Internet” and skip the following procedures. 3. Enter the name into the “Proxy server” field. 4.

  • Page 135: Sending And Receiving Messages

    E-mails and SMS Messages Refer to “Connecting to the Internet” section to learn how to connect the Pocket PC to the Internet and start using Messaging to send and receive E-mails and SMS messages. This section explains the basic preparations and processing principles. If you have any questions, refer to online help about Pocket PC or ActiveSync.

  • Page 136: Synchronizing E-Mail Messages

    Synchronizing E-mail Messages If you want to synchronize e-mails with company or home usage, please refer to this section. E-mail messages can be synchronized as part of the general synchronization process. You will need to enable Inbox synchronization in ActiveSync. For information on enabling Inbox synchronization, see ActiveSync Help on the desktop computer.

  • Page 137: Connecting Directly To The Mail Server

    Connecting Directly to the Mail Server For single-machine use, not combining office and home E-mails, please refer to “E-mail Server Setup” section. You will receive messages directly from the mail server. This is irrelevant to personal computer use. You can work online or offline. When working online, you read and respond to messages while connected to the e-mail server.

  • Page 138: E-Mail Server Setup

    E-mail Server Setup Refer to this section if you are preparing for single-machine use and not combining office and home E-mails. If you already have an E-mail account from your ISP or company network, you can use Messaging to send and receive mails and messages.

  • Page 139: Using E-Mails And Sms

    Using E-mails and SMS Below is a brief description of the Messaging screen functions: Select the service and folder you want to display. Select the sort order for messages. Tap to open a message. Tap and hold to display a pop-up menu of actions.
  • Page 140 Brief description on writing, sending, reading and replying (to) mail: 1. Send and Receive Mail: Tap New to compose a message and then tap Send to send it. Tap To, Cc or Bcc to open the Contacts screen. As long as you have set up Contacts beforehand, you can just tap to select.
  • Page 141 2. Read and Reply: Receive new mails by tapping Menu and then Send/Receive. Switch to the “Inbox” folder and tap to open. The following figure shows the open mail screen. Besides reading the messages, provide frequently-used functions for replying to or forwarding. 3.

  • Page 142: Direct Push Technology Alert

    Direct Push Technology Alert The Direct Push Technology alert function will enable you as a corporate user to never miss another e-mail, using the Pocket PC for the best business service. Through the ActiveSync feature, your Pocket PC can instantly and automatically receive important e-mails from Microsoft Exchange Server.
  • Page 143 2. Obtain the server address, user name, network etc. from the company network administrator to successfully setup the server data. 3. Tap Menu and then Schedule. The Peak times and Off-peak times provide a As items arrive option, this is the direct push technology alert function.

  • Page 144: Msn Messenger

    MSN Messenger On the Today screen, tap to display the MSN Messenger sign-in screen. , Programs, Pocket MSN, and then MSN Messenger. To switch to MSN Messenger, tap , Programs, and then tap ® Pocket MSN. MSN Messenger on your Pocket PC is an instant messaging program that lets you: See who is online.

  • Page 145: Setting Up

    Setting Up Before you can connect, you must enter Passport or Exchange account information. To sign in, enter your e-mail address and password. If you already use MSN Messenger on your desktop computer, your contacts will show up on your Pocket PC without being added again. Sending and Receiving Messages 9-11...

  • Page 146: Working With Contacts

    Working with Contacts The MSN Messenger window shows all of your messenger contacts at a glance, divided into Online and Not Online categories. From this view, while connected, you can chat, send an e-mail, block the contact from chatting with you, or delete contacts from your list using the pop-up menu.

  • Page 147: Chatting With Contacts

    Chatting with Contacts View full chat. Enter message. Tap to send message. View status of the chat. To know if the contact you are chatting with is responding, look for the message under the text entry area. Tap a contact name to open a chat window. Enter your message in the text entry area, and tap Send.

  • Page 148: Mms Message

    MMS Message , Programs, Phone, and then MMS Message. The MMS Message mailbox is very similar to ordinary E-mail mailbox function. “Inbox” saves the MMS that you received while “Outbox” saves the MMS that you are going to send. “Sent” saves a backup copy of the MMS sent successfully.

  • Page 149: Setting Up Mms Mailbox

    Setting Up MMS Mailbox You must first apply for GPRS services with your telecommunications service provider. Usually, MMS service comes with GPRS, but this may still depend on your particular service provider and the services that they offer. Please check the detailed information provided by your service provider. After you have performed the complete configuration process, go on to the “Create and Edit MMS”...
  • Page 150 3. Continue and tap the Advanced tab in Connections, and then tap the Select Networks Button. 4. Make sure that the upper item in the screen on the left has been set to “My ISP”. 5. Tap , Messaging, Menu, Go To, and then check MMS.
  • Page 151 6. Tap Messaging, Menu, MMS Settings, and then New Button. The screen displays shown on the left. 7. Refer to the information provided by your service provider and enter the information accordingly, then tap Done Button to save. 8. The “Profile Name” that you enter in the screen shown on the left should be the same as the Connection Name that you entered...

  • Page 152: Create And Edit Mms

    Create and Edit MMS How to add a new MMS: 1. Select MMS Message to display a MMS template that you can edit freely. 2. Tap specified areas to insert the desired picture, text and audio files. Tap To button to select a phone number or E-mail address from your Contacts.

  • Page 153: Multimedia

    Using Camera , Programs, Multimedia, and then Camera. 1. To take photos of scenery or of other people, turn the Pocket PC so the screen is facing you and when you are satisfied with the composition, press the button on the side of the Pocket PC. 2.

  • Page 154: Camera Mode

    Camera Mode You can use Camera to shoot pictures and videos. This section describes the Camera tools. Exit Camera Camera toolbar Viewfinder Switch between Camera and Digital Video modes Open or close the toolbar Icon Meaning Photo mode: Normal, Timer, Continuous shutter, Portrait Activate “Timer”...

  • Page 155: Camera Mode Using Wizard

    Camera Mode Using Wizard to select Wizard. After you press the shutter button on the side of the Pocket PC, the Wizard will guide you through how to link to other programs conveniently. This section explains the Wizard tools. Exit Camera Photo-viewing area, retains the last photo just taken Wizard toolbar...

  • Page 156: Shutter

    Managing Pictures Shot by Continuous Shutter to select “Continuous shutter” in the wizard mode. After you press the shutter button, you can preview all thumbnails just shot and delete the unnecessary one. Exit Camera Tap the thumbnail that you want to delete on the toolbar to delete the unnecessary picture...

  • Page 157: Digital Video Mode

    Digital Video Mode Recording without entering the Camera screen: Directly press and hold Recorder Button for a few seconds and then release to start recording. To finish recording, press the Recorder Button to stop. , Programs, Multimedia, and then Camera, DV Mode. 1.

  • Page 158: Digital Video Mode Using Wizard

    Digital Video Mode Using Wizard to select Wizard. After you finish recording, the Wizard will guide you through how to link to other programs conveniently. This section explains the Wizard tools. Exit Camera The photo viewing window stops at the first scene of the video you just recorded.

  • Page 159: Speed Shooting Using The Hardware Hotkeys

    Speed Shooting Using the Hardware Hotkeys Capture Mode Adjust Focus Exit Camera Switch between Camera and Video Recording modes Open or close the toolbar Camera Shutter/Video Recorder Setting Mode/Wizard Mode Use the Navigation Button to navigate up, down, left and right to select from the icons on the screen.

  • Page 160: Multimedia Manager

    Multimedia Manager , Programs, Multimedia, and then Multimedia Manager. You can use Multimedia Manager to manage and view multimedia information such as pictures, music, videos, etc. Preview Multimedia Information Select the folder you want to display. Tap to change the order of the list. Preview thumbnail.

  • Page 161: Slide Show Function

    Slide Show Function Tap Multimedia Manager, View, and then SlideShow. Double tap anywhere on the screen to exit the slideshow. Playing the last picture while not in the slide show looping mode, tap the screen and then tap the icon to exit the slideshow. Refer to the method described above to exit the slideshow and enter the screen shown on the left.

  • Page 162: Multimedia Manager Tools

    Multimedia Manager Tools Tap Multimedia Manager, Tools, and then Setting. Slideshow tab: As shown on the left, this is the settings of the slideshow mode. Association tab: Select the desired file type you want to open with Multimedia Manager. File Browse tab: Set the browsing method.

  • Page 163: Image Maker

    Image Maker , Programs, Multimedia, and then Image Maker. Image Maker is used to create, edit and view pictures. Use it to view and edit the pictures you take. You can also use the relevant Image Maker commands and tools such as rotate, stretch, brightness, etc. to edit and process the graphics.
  • Page 164 Icon Meaning of the Drawing Tool Box Select foreground and background colors Eraser Pick color Pencil for writing and drawing lines Airbrush Line Curve Rectangle Ellipse Polygon Rounded rectangle Text Select Fill with color Magnifier Brush Icon Meaning of the Drawing Toolbar New document Open Save...

  • Page 165: Image Wizard

    Image Wizard , Programs, Multimedia, and then Image Wizard. Image Wizard provides frames, icons, filters and simple drawing tools that you can use to process photos and pictures. Wizard will guide you to complete the process step-by-step. You can then choose to save the file or send it through E-mail or MMS Message.

  • Page 166: Fm Tuner

    FM Tuner , Programs, Multimedia, and then FM Tuner. This program is for listening to the radio with headset. The headset will improve radio quality with its built-in antenna. Tool bar: Screen off: This function turns off the screen but leaves the program running.
  • Page 167 Set the station frequency. Tap and edit the frequency to set a custom station. Note: The frequency must be in the legal range. Cancel. Delete the previous digit. Tap the My Favorite Button in the main screen to set My favorite station.
  • Page 168 10-16...

  • Page 169: Companion Programs

    ® Microsoft Pocket Outlook includes Calendar, Contacts, Tasks, Messaging, and Notes. You can use these programs individually or together. For example, e-mail addresses stored in Contacts can be used to address e-mail messages in Messaging. ® Using ActiveSync , you can synchronize information in Microsoft Outlook or Microsoft Exchange on your desktop computer with your Pocket PC.
  • Page 170 Calendar: Scheduling Appointments and Meetings Use Calendar to schedule appointments, including meetings and other events. You can check your appointments in one of several views (Agenda, Day, Week, Month, and Year) and easily switch views by using the View menu. Tap to go to today.

  • Page 171: Create An Appointment

    Create an Appointment Tap to return to the calendar (the appointment is saved automatically). Tap to choose from predefined text. Tap to choose from previously entered locations. Tap to select a time. Tap to select a date. Notes is a good place for maps and directions.

  • Page 172: Use The Summary Screen

    Use the Summary Screen When you tap an appointment in Calendar, a summary screen is displayed. To change the appointment, tap Edit. View appointment details. View. Tap to change appointment. Create Meeting Requests You can use Calendar to set up meetings with users of Outlook or Pocket Outlook.

  • Page 173: Schedule A Meeting

    Schedule a Meeting 1. Create an appointment. 2. In the appointment details, hide the input panel, and then tap Attendees. 3. From the list of e-mail addresses you’ve entered in Contacts, select the meeting attendees. The meeting notice is created automatically and placed in the Outbox folder.

  • Page 174: Contacts: Tracking Friends And Colleagues

    Contacts: Tracking Friends and Colleagues Contacts maintains a list of your friends and colleagues so that you can easily find the information you’re looking for, whether you’re at home or on the road. Tap and enter part of a name to quickly find it in the list.

  • Page 175: Create A Contact

    Create a Contact 1. Tap New. 2. Using the input panel, enter a name and other contact information. You will need to scroll down to see all available fields. 3. To assign the contact to a category, scroll to and tap Categories and select a category from the list.

  • Page 176: Find A Contact

    Find a Contact There are four ways to find a contact: In the contact list, enter a contact name in the box under the navigation bar. To show all contacts again, clear text from the box or tap the button to the right of the box.

  • Page 177: Use The Summary Screen

    Use the Summary Screen When you tap a contact in the contact list, a summary screen is displayed. View contact details. All of the available contact information is listed, you can tap and use easily. Tap Menu and then Edit to change the contact information.

  • Page 178: Tasks: Keeping A To Do List

    Tasks: Keeping a To Do List Use Tasks to keep track of what you have to do. Indicates high priority. Tap to display or edit the task details. Tap and hold to display a pop-up menu of actions. Tap to create a new task. Provides the relevant menu.

  • Page 179: Create A Task

    Create a Task 1. Tap New. 2. Using the input panel, enter a description. 3. You can enter a start date and due date or enter other information by first tapping the field. If the input panel is open, you will need to hide it to see all available fields.

  • Page 180: Use The Summary Screen

    Use the Summary Screen When you tap a task in the task list, a summary screen is displayed. To change the task, tap Edit. View task details. Tap to show and hide additional summary information. View notes. Tap to change task. 11-12...

  • Page 181: Notes: Capturing Thoughts And Ideas

    Notes: Capturing Thoughts and Ideas Quickly capture thoughts, reminders, ideas, drawings, and phone numbers with Notes. You can create a written note or a recording. You can also include a recording in a note. If a note is open when you create the recording, it will be included in the note as an icon.

  • Page 182: Create A Note

    Create a Note 1. Tap New. 2. Create your note by writing, drawing, typing, and recording. For more information about using the input panel, writing and drawing on the screen, and creating recordings, see “Enter Information on Your Pocket PC.” Tap to return to the note list (the note is saved automatically).

  • Page 183: Word Mobile

    Word Mobile Word Mobile works with Microsoft Word on your desktop computer to give you easy access to copies of your documents. You can create new documents on your Pocket PC, or you can copy documents from your desktop computer to your Pocket PC. Synchronize documents between your desktop computer and your Pocket PC so that you have the most up-to-date content in both locations.
  • Page 184 Select the type of folder you want displayed in the list. Tap to change the sort order of the list. Tap to open a document. Tap and hold an item to see a pop-up menu of actions. Tap to create a new document. You can change the zoom magnification by tapping View and then Zoom.
  • Page 185 Using the input panel, enter typed text into the document. For more information on entering typed text, see “Enter Information on Your Pocket PC.” To format existing text and to edit text, first select the text. You can select text as you do in a Word document, using your stylus instead of the mouse to drag through the text you want to select.

  • Page 186: Excel Mobile

    Excel Mobile Excel Mobile works with Microsoft Excel on your desktop computer to give you easy access to copies of your workbooks. You can create new workbooks on your Pocket PC, or you can copy workbooks from your desktop computer to your Pocket PC. Synchronize workbooks between your desktop computer and your Pocket PC so that you have the most up-to-date content in both locations.
  • Page 187 Excel Mobile provides fundamental spreadsheet tools, such as formulas, functions, sorting, and filtering. To display the toolbar, tap View and then check Toolbar. Cell contents appear here as you enter them. Select cell contents for the resource of chart. Insert Chart button AutoSum button Zoom button Tap Insert Chart Button to modify...

  • Page 188: Tips For Working In Excel Mobile

    Tips for Working in Excel Mobile For more information on using Excel Mobile, tap and then Help. Note the following when working in large worksheets in Excel Mobile: View in full-screen mode to see as much of your worksheet as possible. Tap View and then Full Screen.

  • Page 189: Powerpoint Mobile

    PowerPoint Mobile View PowerPoint slides created in PowerPoint 97 and above versions on your desktop computer. The supported formats include .ppt and .pps files. Select the type of folder you want displayed in the list. Tap to change the sort order of the list.

  • Page 190: Windows Media Player

    Windows Media Player Use Microsoft Windows Media Player for Pocket PC to play digital audio and video files that are stored on your Pocket PC or on a network. To switch to Windows Media Player for Pocket PC, tap and then Windows Media.
  • Page 191 Use Microsoft Windows Media Player on your desktop computer to copy digital audio and video files to your Pocket PC. You can play Windows Media and MP3 files on your Pocket PC. For more information about using Windows Media Player for Pocket PC, tap , and then tap Help.

  • Page 192: Internet Explore

    Internet Explore Using Internet Explore ® Use Microsoft Internet Explorer Mobile to view Web or WAP pages in either of these ways: During synchronization with your desktop computer, download your favorite links and mobile favorites that are stored in the Mobile Favorites subfolder in Internet Explorer on the desktop computer.

  • Page 193: Browse The Internet

    Browse the Internet Refer to “Connecting to the Internet” section to connect the Pocket PC to the Internet and start browsing websites. 1. Tap and then Internet Explorer. 2. Input the site address into the address bar at the top of the screen and connect to this site.

  • Page 194: View Mobile Favorites And Channels

    View Mobile Favorites and Channels Tap the favorite you want to view. Tap to add or delete a folder or favorite link. 1. Tap the Favorites button to display your list of favorites. 2. Tap the page you want to view. You’ll see the page that was downloaded the last time you synchronized with your desktop computer.

  • Page 195: Favorite Links

    Favorite Links During synchronization, the list of favorite links in the Mobile Favorites folder on your desktop computer is synchronized with Pocket Internet Explorer on your Pocket PC. Both computers are updated with changes made to either list each time you synchronize. Unless you mark the favorite link as a mobile favorite, only the link will be downloaded to your Pocket PC, and you will need to connect to your ISP or network to view the content.

  • Page 196: Save Pocket Pc Memory

    5. Synchronize your Pocket PC and desktop computer. Mobile favorites that are stored in the Mobile Favorites folder in Internet Explorer are downloaded to your Pocket PC. If you did not specify an update schedule in step 3, you will need to manually download content to keep the information updated on your desktop computer and Pocket PC.

  • Page 197: Maintaining The Pocket Pc

    Backup Utility , Programs, Utilities, and then Backup Utility. Backup Utility is used to back up or restore files saved in the Pocket PC. You can back up personal data such as Calendar, Contacts, Tasks, Personal profile, Network settings, Messaging (E-mails and SMS), etc. Storage Space When making backups, you can choose the following storage spaces: 1.

  • Page 198: Backup Files

    Backup Files Wizard Mode Tap Backup. Next Button and the Wizard will guide through the steps that follow. Standard: Switch to the Standard mode. Standard Mode Backup your personal data to a storage space. Tap the Backup tab. Tap to check the items for backup. Tap the function button to select the storage space from the list.

  • Page 199: Advanced Settings Options

    Advanced Settings Options Under the Backup Files screen, tap Advanced Button to enter the Advanced settings screen as shown below. Check the options as required. If you check this option, the Wizard will guide you through the steps to complete the operation the next time you open Backup Utility.
  • Page 200 If you checked “Auto backup on schedule,” tap to enter the screen shown on the left. Backup frequency. Tap the date button on the right of “Starting” to set the starting date. Tap the time button on the right of “Starting”...

  • Page 201: Restore Files

    Restore Files Caution! 1. When restoring files, the system will delete all current data in the Pocket PC and replace it with the backup files. 2. To make sure that files can be restored successfully, do not use the Pocket PC while performing restore.

  • Page 202: Standard Mode

    Standard Mode Restore the backup personal data from a storage space. Tap the Restore tab. Select “Latest” below “Restore From.” Or select from the list. Tap backup file name from the list under “File Name.” Restore Button to start restoring. 12-6...

  • Page 203: Adding Or Removing Programs

    Adding or Removing Programs Programs added to your Pocket PC at the factory are stored in ROM (read-only memory). You cannot remove this software, and you’ll never accidentally lose ROM contents. All other programs and data files added to your Pocket PC after factory installation are stored in RAM (random access memory).

  • Page 204: Add A Program Directly From The Internet

    5. Double-click the *.exe file. If the file is an installer, the installation wizard will begin. Follow the directions on the screen. Once the software has been installed on your desktop computer, the installer will automatically transfer the software to your Pocket PC.

  • Page 205: Add A Program To The Start Menu

    Add a Program to the Start Menu , Settings, the Personal tab, and then Menus. Check the box for the program. If you do not see the program listed, you can either use File Explorer on the Pocket PC to move the program to the Start Menu folder, or use ActiveSync on the desktop computer to create a shortcut to the program and place the shortcut in the Start Menu folder.

  • Page 206: Remove Programs

    Using ActiveSync on the desktop computer: Use the Explorer in ActiveSync to explore your Pocket PC files and locate the program. Right-click the program, and then click Create Shortcut. Move the shortcut to the Start Menu folder in the Windows folder. The shortcut now appears on the menu.

  • Page 207: Manage Memory

    Manage Memory View Memory Status , Settings, the System tab, and then Memory. Tap the Main tab. The status of Storage and Program memory. Find: Quick link to the Search program. Tap the Storage Card tab. Current storage card memory status.

  • Page 208: Find Available Memory

    Tap the Running Programs tab. Tap a program name in ”Running Programs List” and when it is highlighted, tap Activate or Stop. Activate: Start running the program you selected. Stop: Stop the program you selected. Stop All: Stop all programs in the “Running Programs List.”...
  • Page 209 3. Tap , Programs, and then File Explorer. Use File Explorer to move the files you want to keep to external storage cards. Tap and hold the items to be moved, then tap Cut or Copy on the pop-up menu. Move to the storage card and then tap Paste.
  • Page 210 , Programs, Notes/Word Mobile/Excel Mobile, Menu, and then Options. 1. Enter the Notes file list screen. 2. Tap Menu and then Options. 3. Tap the “Save to” function button and select SDMMC from the list. This indicates that you are using your external storage card.

  • Page 211: System Information

    System Information , Settings, the System tab, and then System Information. Tap + or - to display or hide the system information. Maintaining the Pocket PC 12-15...
  • Page 212 12-16...

  • Page 213: Voice Commander

    , Programs and then Voice Commander. Voice Commander is continuous voice recognition application software in the Pocket PC. Voice Commander allows the user to use their own voice to dial and control functions. Voice Commander has the following features: Fully voice-controlled system that allows the user to complete operations (such as dialing phone or running applications) quickly without using hands.

  • Page 214: Starting Voice Commander

    Starting Voice Commander Here are two methods for running Voice Commander: 1. Tap , Programs, Voice Commander, and then Voice Commander. 2. Voice Commander Button. The system sets the button on the Pocket PC as the exclusive “Voice Commander” button. Just press this button to run Voice Commander.

  • Page 215: Voice Command Format

    Voice Command Format Press the Voice Commander Button on the Pocket PC and enter the Voice Commander screen. Voice Name dialing Usage: Call <Contact> at <Home/Work/Mobile> Example 1: Call Jennifer Lopez Example 2: Call Jennifer Lopez at mobile Voice Show Contact Usage: Show <Contact>...
  • Page 216 Tips All the names in Contacts will automatically become recognizable contacts in the “Voice dialing” syntax. However, if the number of contacts exceeds 1000 entries, the system will not recognize the excessive entries. To add these entries to Voice Commander for recognition, tap Menu and then Settings or run Voice Commander Settings to check and add these contacts manually for voice recognition.

  • Page 217: Voice Commander Settings

    Voice Commander Settings There are two ways to run Voice Commander Settings: , Programs, Voice Commander, and then Voice Commander Settings. Tap Menu and then Settings while using Voice Commander. Voice Commander Settings allows the user to personalize the Voice Commander settings, add and remove contacts or applications within the recognition range, record voice tags or play commands to prompt the user on how to say the correct command.
  • Page 218 Play Button: Play the recorded voice tag for this contact and hear how it is pronounced. Build Button: Record the voice tag for this contact again. Delete Button: Delete the voice tag for this contact. Contacts tab: Sets the voice commands for Contacts. Application tab: Sets the voice commands for applications.
  • Page 219 Tips You can choose which Contacts are to be added to the recognizable range of the Voice Commander. By default, the system automatically adds all names within the recognizable range. If the number of Contacts exceeds 1000 entries, the system will not recognize the excessive entries.

  • Page 220: Application Settings Page

    Application Settings Page Tap Voice Commander Settings and then the Application tab and the Settings page will list the applications and settings installed by the Pocket PC and then Programs (whether or not it is selected, with or without voice tag). You can choose which applications are to be added to the recognizable range of the Voice Commander.
  • Page 221 Application example: You want to record MSN Messenger as “Chat room.” 1. Tap MSN Messenger. 2. Tap Build Button. 3. When you hear a beep, say the words “Chat room” that you want to record. 4. When you hear a second beep, say “Chat room” again. 5.

  • Page 222: Music Settings Page

    Music Settings Page Tap Voice Commander Settings and then the Music tab, the settings page will list the music files and configuration status of the specify folder in your Pocket PC or on your storage card. If you add a new music file, the system will update in real-time, automatically adding the file to your recognizable range, saving you the time of searching for your music files.
  • Page 223 Check box function If the music file name is checked, it can be identified normally. If unchecked, this indicates that it is not within the recognizable range. If the check box is gray and cannot be checked, this indicates that the item is unrecognizable.

  • Page 224: Digit Training Settings Page

    Digit Training Settings Page Tap Voice Commander Settings and then the Digit Training tab. This function trains a set of personal voice model to increase accuracy in recognition for users with heavier accents. : Voice tag is built. : Current digit to be recorded. Check “Use adapted model”...
  • Page 225 Tips As long as you have completed recording, then you can check “Use adapted model” to use the personal model tailored made for you. It is recommended that you recite all 10 sets of numbers so the adaptation effect is more obvious. If you do not want to use the adapted model, then just uncheck “Use adapted model.”...

  • Page 226: Advanced Settings Page

    Advanced Settings Page The Sensitivity setting is for voice recognition. The “Length of phone number” setting specifies the maximum number of digits that can be entered as the phone number. These settings will improve recognition accuracy. Sensitive: When you use this setting, the voice recognition system is not as strict while performing voice recognition tasks,...

  • Page 227: Faq

    Question: I want to make a call to my friend Andy Miller, but I’m tired of reading manuals. What do I need to know if I just want to make phone calls? Answer: Make sure you have Andy Miller’s name and phone number in the contact database.
  • Page 228 Question: I performed digit training today, but I found that the accuracy is worse than before, what do I do now? Answer: You can retry the digit training again in a “quiet” place. And if it still doesn’t help, disable the adapted model and use the default one. To disable the adapted model, tap Voice Commander Settings, the Digit Trainer tab, and then uncheck “Use adapted model.”...

  • Page 229: Specifications

    Item Description Operating system Windows Mobile™ 5.0 software for Pocket PCs (AKU 3.2) Processor Samsung SC3 2442, 400 MHz Memory 128 MB Flash ROM, 64 MB SDRAM Display 2.8", 240 x 320, 65,536 colors, TFT-LCD Communication GSM Quad band 850/900/1800/1900 MHz EDGE GPRS Class 10 ®...
  • Page 230 Item Description Environmental Daily operation: 0°c ~ 40°c; storage: -10°c ~ 50°c temperature Environmental 45% ~ 85% humidity Dimensions 117.5 x 59 x 19.6 mm (LxWxH) 165 g including battery ® Optional Battery, Car charger, Bluetooth Headset accessories Design and specifications are subject to change without notice. 14-2...

  • Page 231: Regulation Notice And Safety Declaration

    SAR Information Read this manual carefully before using. Warning: Reduced electromagnetic waves, please use properly. GSM: 0.586 W/kg DCS: 0.112 W/kg Regulation Notice and Safety Declaration 15-1...

  • Page 232: Health And Safety Information

    Health and Safety Information Electrical and Battery Safety ♥ Use only the AC adapter provided with this product. Do not use similar items from other products. The provided AC adapter is for use with this product only. Do not use it for other electrical products. ♥...
  • Page 233 Warranty Security ♥ In case the Pocket PC is damaged, kindly return it to your place of purchase. Do not attempt to disassemble this device on your own as this may void the warranty. ♥ If any hazards result from the failure of the user to comply with usage rules, we will not be held responsible for any resulting warranty claims.
  • Page 234 Safety In Aircrafts ♥ Due to the possible interference caused by this product to an aircraft's navigation system and its communications network, using this product on board an airplane is against the law in most country. Interference With Medical Equipment Functions ♥...
  • Page 235 Explosive Atmospheres ♥ When in any area with a potentially explosive atmosphere or where flammable materials exist, the product should be turned off and user should obey all signs and instructions. Sparks in such areas could cause an explosion or resulting in bally injury or even death. Users are advised not to use the equipment at refueling points such as service or gas stations.
  • Page 236 15-6...
  • Page 237 1. What features does the Pocket PC have? Answer: Built-in 802.11b/g wireless networking module. The built-in camera module’s sensitization, filming quality are better than other brands of Pocket PC in the same class. The latest Microsoft Windows Mobile 5.0 operating system, with all its settings stored on a Flash ROM.
  • Page 238 3. My Pocket PC cannot boot. What should I do about it? Answer: Make sure the Pocket PC battery you use still has enough power. Plug your Pocket PC into the charger, and make sure the red charging indicator lights up. Press the “Power Button.” If you have done the above but your Pocket PC still cannot boot, proceed with the following step: Remove the Pocket PC back cover, and check the battery lock is in place.
  • Page 239 5. Why doesn’t my Pocket PC make any sound? Answer: Tap the speaker icon on the top right of the screen, then select the volume control options, or adjust the volume of the incoming call sound. Alternatively, you may use the volume control key on the side of your Pocket PC by pushing it up or down to control the volume.
  • Page 240 8. The characters on the screen are too small to read. How can I enlarge them? Answer: Tap , Settings, the System tab, Screen, and then the Text size tab. You may adjust the text size as you wish. Also, you may select the landscape orientation in the General tab screen.
  • Page 241 11. My Pocket PC's Activesync cannot be executed or make a connection. What should I do about it? Answer: Make sure you have installed Activesync version 4.1 or above. The CD accompanying the product contains the software. If you have lost the CD, you may download it from the Microsoft Website.
  • Page 242 First Version: December 2006 Current Version: December 2006, Version 1 Number: 20061130 16-6...

Table of Contents